30-06 1:10" Twist??

stanley52

Well-Known Member
Joined
Jan 20, 2013
Messages
284
Location
Southeast Kansas
Ok so I am considering buying a Nosler M48 Heritage in 30-06. I can get one for a pretty great deal for what they are...they come with 1:10" twists. That's an awful quick twist for an '06. On JBM the stability factor has it like 2.4 for most 175gr bullets and below at 500 feet altitude. Going up to like 8000 feet it's a stability factor of 2.8 or so. Are is that 1:10 going to over-stabilize medium weight bullets or will they be fine? Will accuracy suffer/bullet jackets separate potentially?
 
I have a Rem. 760 pump in 30/06 and according to Rem. it has a 1:10 twist. It shoots 150 and 165 gr. bullets to 1/2 inch groups at 100 yards. Also a friend has a Savage mod.110 with 1:10 twist and it too shoots 150 and 165 grain bullets under 1 inch at 100 yards. I don't know what a higher elevation would do with either rifle.
 
Very few rifles chambered in 30-06 come with twist other than 1-10.
I have never heard of any problems at high elevation.
 
I would not go slower than 10" twist in any .308 cal. The last 30 cal that we built was on an 8" twist. The one that we just ordered barrel and action for is on a 9.4" twist.

Steve
 
Warning! This thread is more than 9 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.

Recent Posts

Top