25 Sherman LA. Load data help?

[waspocrew]

Expensive, but you could likely sell off 100 ct lots to offset the cost.

Peterson 280 Ackley Improved Casing Box of 500 PCC280AI500

FREE SHIPPING on Peterson 280 Ackley Improved Casing Box of 500 PCC280AI500

www.eurooptic.com

 

[waspocrew]

I have NIB 50 ct Hornady 270 Win available if you'd rather start with that.

I have a 6.5 Sherman and use their 270 Win brass (which hasn't been available for a while). Definitely quality brass.

 

[Michael Hirschi]

You can try the 125, 127, 128 gr hammer bullets.

That's a great idea. I do have lots of bullets now. I'm more looking for powder charges to match with the listed powders. Thanks.

 

[Michael Hirschi]

Expensive, but you could likely sell off 100 ct lots to offset the cost.

Peterson 280 Ackley Improved Casing Box of 500 PCC280AI500

FREE SHIPPING on Peterson 280 Ackley Improved Casing Box of 500 PCC280AI500

www.eurooptic.com

I'll take a look at this. Good idea

 

[Phil Rizzo]

I've not used those particular powders.
But the right charge of H4350 would
likely be good for fire forming brass.
Use a maximum 25/06 load with whichever bullet you try.
With a little tweaking you can probably find a very precise load using high quality brass.
For slower powders and full power loads after forming cases, always use a magnum primer.
Keep the bullet touching the lands when forming brass.

 

[Michael Hirschi]

I have NIB 50 ct Hornady 270 Win available if you'd rather start with that.

I have a 6.5 Sherman and use their 270 Win brass (which hasn't been available for a while). Definitely quality brass.

What is your price? I keep hearing about the quality of Lapua, Peterson or ADG. Is Hornady close?

 

[Michael Hirschi]

I've not used those particular powders.
But the right charge of H4350 would
likely be good for fire forming brass.
Use a maximum 25/06 load with whichever bullet you try.
With a little tweaking you can probably find a very precise load using high quality brass.
For slower powders and full power loads after forming cases, always use a magnum primer.
Keep the bullet touching the lands when forming brass.

What powders do you use and what are the results?

 

[Phil Rizzo]

Reloader 23 is my favorite, so far with 100-115gr bullets.
keep in mind I have a 27"+ 9tw barrel.
100gr ballistic tips max out over 3700 and the 115's around 3550fps. 110 accubond in between.
Accuracy seems best between 100-125fps off those max numbers.
I won't be using any heavier bullets in that one UNLESS Nosler actually releases some heavier that work in a 9tw with a good push behind them.

 

[Eric H]

That's a great idea. I do have lots of bullets now. I'm more looking for powder charges to match with the listed powders.

That's a great idea. I do have lots of bullets now. I'm more looking for powder charges to match with the listed powders. Thanks.

Only thing I've seen is for the SST.