• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

25-06 needs new bbl - 25-06, 6.5x284, or 6.5-06

What about the 280 Nosler AI? H4350, H4831sc, H1000, IMR7828ssc all very good powder choices. Can shoot lighter bullets if you want to, or you can hammer the 162gr Amax. With a real good barrel you can get pretty close to 7mm Rem velocities. I have been chewing on this myself for a good while for my savage 111.

Gary
 
I would do the 6.5-06 for barrel life alone! The 25-06 is a little overbore, but not great, and the 6.5-06 is close to perfect. The 6.5/284 is a real barrel burner (less than 800 rounds is normal), and really dosn't shoot anybetter than the other. You also might want to think about the 6.5x57AI. It's nothing but a .257AI necked up to 6.5 (or a 7x57necked down). Ballistics are very close to the 6.5-06, but in a shorter case. Thus giving you much more room in the magazine for longer bullets seated way out.
gary

How can a 6.5-06 be just right and a 6.5x284 be a real barrel burner when
they both are exactly the same size case?
6.5x284 case capicity 65.5
6.5-06 capacity is 65.8
 
Are you sure it's worn out? Or, is it an older 25-06 with a 1 in 12 twist barrel?

I have a 25-06 with a slow twist. As such, it favors the lighter bullets.

Kirby Allen has/had a 25 cal cartridge that was designed for the Wildcat bullets when in production. Aside from extra velocity, what twist was he using? Other than those custom bullets, 1 in 10 should be adequate.

I'm rebarreling mine to 6.5x284. Why? Because I want to.

-- richard
 
Well like I've said I'd go 6.5x284. A 6.5x284 norma case holds 66.2 grains Imr 4350 as does a winchester 30-06 case therefore your going to use the same amount of powder in a 6.5-06 and have a 3.4" oal or more, also the 284 case was pretty well what brought about the WSMs, short and fat, with a 35* shoulder which is more efficient than an 06 case that's the reason a 30x284 will out run a 30-06. So the only cartridge that steps ahead is the 6.5-06AI with more powder space, all in all the 6.5x284 and 6.5-06 can live beyond 2000 rounds if not heated, kept dirty, or treated like there semi autos, and the 6.5-06AI will be a bit harder on barrels but not much.
 
Well according to the OP's signature he already has a 6.5-06? Right?

If he does, i would 2nd (or 3rd:D) the recommendation to go with the 25-06AI, fast twist & 115 Bergers or Wildcats if you can find'em.

And best of all... no stinking belt, i know, i know, there is nothing wrong with a belt lol
 
I have the 6.5-06 AI and the 6.5 Gibbs. Both will outperform the 6.5-284 in long range hunting. That is why I have them instead of the 284 case. My Gibbs is nearly the equal of my 264 winchester.
 
They are close
gibbs = 68.7 case capacity
100 gr =3559 fps
129 gr =3251 fps
140 gr =3126

264 = 80.7 case capacity
100 gr = 3680 fps
129 =3269 fps
140 =3163 fps
 
Last edited:
How can a 6.5-06 be just right and a 6.5x284 be a real barrel burner when
they both are exactly the same size case?
6.5x284 case capicity 65.5
6.5-06 capacity is 65.8

too short of a neck on an otherwise near perfect case design. This puts the T.P. right in the barrel throat
gary
 
Warning! This thread is more than 14 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top