22 Creedmoor load data

[LONGRANGE JUNKIE]

I have a new 22 CM in a AR platform and with limited powder and limited load data available I am trying to come up with a starting point using components I have in stock. I am looking at using 6.5 brass, CCI 200 primers, Varget or Superformance powder and Hornady ELD-m or BTHP. Does anyone have any info they are will to share?

 

[waspocrew]

Doesn't look like I can send a PM...

Here's a link to a bunch of 22 Creed info. Hopefully you'll find what you're looking for!

22 creedmoor

I know several folks including myself have been playing with the 22 creedmoor for a while now. Please keep this thread to actual reloading information, and if you can please post some round count, barrel life numbers are all over the place. Here is a brief summary of the cartridge. You need to...

www.snipershide.com

 

[Txhillbilly]

I neck down Starline SRP 6mm CM brass for mine. I'm shooting 75gr Hornady A-Max and ELD-X bullet's. I mainly use H4350 for the propellant with very good results.

 

[357Mag]

I have a new 22 CM in a AR platform and with limited powder and limited load data available I am trying to come up with a starting point using components I have in stock. I am looking at using 6.5 brass, CCI 200 primers, Varget or Superformance powder and Hornady ELD-m or BTHP. Does anyone have any info they are will to share?

Longrange -

How long is your rifle's barrel length ?


With regards,
357Mag

 

[LONGRANGE JUNKIE]

Longrange -

How long is your rifle's barrel length ?


With regards,
357Mag

22" 1-8 twist

 

[LONGRANGE JUNKIE]

I have been told that H4350 work great, however in my area I haven't seen it for over a year. I am looking for help using either Varget or Superformance powder. These are a couple I have now.

 

[Andrew Massi]

Adg 22 cm brass
Fed 210m
39.0 g h4350
3245 fps
26" carbon six 1:7 twist.

 

[Andrew Massi]

I have been told that H4350 work great, however in my area I haven't seen it for over a year. I am looking for help using either Varget or Superformance powder. These are a couple I have now.

You can use existing 22-250 or 22-250ai data to get started

 

[Pdvdh]

Adg 22 cm brass
Fed 210m
39.0 g h4350
3245 fps
26" carbon six 1:7 twist.

Which bullet?

 

[LONGRANGE JUNKIE]

Thank you guys

 

[Andrew Massi]

88 eld-m sorry

Which bullet?

 

[Pdvdh]

88 eld-m sorry

Nice. That's the bullet I plan on trying in mine. Thanks

 

[OnTargetAdventure]

I cannot find 4350 in my area either and I am wondering if anyone has tried IMR 4064 or 4895? My preference would be 4350 but I have the others here. Thoughts?

Thanks

 

[OnTargetAdventure]

sorry - Petersen brass and 88.5 gr berger bullets