americanquigley
Member
What's your barrel length and load data? (Powder etc) Looking at building ultra light 6.5 prc 20" want to sling the 147 eldm at or around 2900 fps plus.
20” 6.5 prc (short barrels)
- Thread starter americanquigley
- Start date
Help Support Long Range Hunting Forum
Epirate43
Well-Known Member
I have a 20 inch bartlien carbon 1-7.5 twist. 56.5 grains of n560 is 2960 fps. Lapua brass fed 210m primer 147 eldm
PingGong3
Well-Known Member
22" Bartlein barrel
2930fps
156gr Berger
59.3gr H1000
Federal 210M primer
Shoulder Bump 1.647
Ogive 2.295 (.025 off lands)
Coal 3.005
2930fps
156gr Berger
59.3gr H1000
Federal 210M primer
Shoulder Bump 1.647
Ogive 2.295 (.025 off lands)
Coal 3.005
18". 1/8 twist.
Lapua brass, wlrm primer, 59gr Retumbo it's spicy don't start here! Know you're rifle and work up.
Full specs
Ca ridgeline action and barrel, Va element (xlr) mg 4.0 all the carbon, banish 30 suppressors 7", mdt grnd pod, ware rings, 3.6-18 mk5.
9# 12oz with three in the mag
Shoots fantastic, going to be my go to for everything this year
Lapua brass, wlrm primer, 59gr Retumbo it's spicy don't start here! Know you're rifle and work up.
Full specs
Ca ridgeline action and barrel, Va element (xlr) mg 4.0 all the carbon, banish 30 suppressors 7", mdt grnd pod, ware rings, 3.6-18 mk5.
9# 12oz with three in the mag
Shoots fantastic, going to be my go to for everything this year
Attachments
badseed
Well-Known Member
22" proof 1:7.5 twist
124 hammer hunters, 3129fps, 57.5gr 4831sc, rem 9 1/2 primer, lapua case
FACTORY Hornady 147 eldm, 2890fps
124 hammer hunters, 3129fps, 57.5gr 4831sc, rem 9 1/2 primer, lapua case
FACTORY Hornady 147 eldm, 2890fps
20 " Proof 7.5 Twist N560 124 HH @3250 210M Lapua Brass
azsugarbear
Well-Known Member
Proof Research 20" carbon fiber barrel w/7.5 twist
Thunderbeast Dominus SR Suppressor
56.2 gr. of RL26 (stout load, but very accurate)
Fed 210 primer
160 gr. Matrix VLD bullet @ 2,930 fps
Alpha brass
Thunderbeast Dominus SR Suppressor
56.2 gr. of RL26 (stout load, but very accurate)
Fed 210 primer
160 gr. Matrix VLD bullet @ 2,930 fps
Alpha brass
jefftrout
New Member
not exactly what you were looking for being after a custom load, but maybe a comparable baseline from factory loads (although in a brand new barrel; I assume after break in things might change a bit?)
Seekins Havac Slam, 21" w/ 8 twist
Silencer Central Banish Backcountry
brand new first 15 shots fired
Barnes LRX 127 gr factory, 2923.7 avg
Federal Terminal Ascent 130gr, 2937.9 avg
Hornady CX 130gr, 2841.4 avg
Seekins Havac Slam, 21" w/ 8 twist
Silencer Central Banish Backcountry
brand new first 15 shots fired
Barnes LRX 127 gr factory, 2923.7 avg
Federal Terminal Ascent 130gr, 2937.9 avg
Hornady CX 130gr, 2841.4 avg
badseed
Well-Known Member
How much powder are you using?
Duffman
Well-Known Member
I got a slow one (don't care it's accurate). 22" proof, Zermatt action, adg brass, 55 grains H1k, 210M primer, 143 eld-x, 2810fps. Retumbo wasn't much better. Originally wanted to shoot 147's in this barrel. They were stupid slow, like sub creedmoor speeds.
BrentM
Well-Known Member
18, 20, and 22 for me.
153 and 156 are 2810 in the 18 and 2915 in the 22.
153 and 156 are 2810 in the 18 and 2915 in the 22.
62.0
