savage

I'm looking to replace the stock on my Savage 110 Ultralight in 30-06. It currently sits in a Boyd's Pro Varmint because the factory stock's forend touched the barrel when loading the bipod suppressed. The Boyd's stock was the only real aftermarket option for the 110 Ultralight when I was...

I have a older savage la 110 flatback bdl that I want change over to a dbm with aics magazine. I have a accustock and a accurate mag bottom metal. The magazine won't go all the way in due to the action having material where the back of the mag needs to go. My question is does anyone have a...

I have a older savage la 110 flatback bdl that I want change over to a dbm with aics magazine. I have a accustock and a accurate mag bottom metal. The magazine won't go all the way in due to the action having material where the back of the mag needs to go. My question is does anyone have a...

So I finally finished it tonight! This project started on the drawing board 2 years ago this month, and kicked off with dummy rounds being sent to Preferred Barrel Blanks in Utah along with the order for a barrel. This design isn't really a long range cartridge. Rather, it's intended to kill...

4 Days left to enter a giveaway to win 1 of 2 Oryx Chassis in any inlet we offer. ENTER HERE

BLACK FRIDAY SALE goes LIVE at 3pm (1500hrs) PST on 25 Nov 20201 until Midnight on 29 Nov. Black Friday is the one time of year we sell off our factory seconds chassis. They're 100% functional but only have a cosmetic defect that we wouldn't want someone to pay full price for. Only $299.95...

Anybody have a Ultralite 6.5 prc with a muzzle brake? Looking for recommendation on a muzzle brake for my Savage 110 Ultralite 6.5 PRC. I want one that has the same OD as the barrel and clean looking. Thanks

I currently own both sets of these mounts and both have performed well. The Talley Lightweight rings are mounted on a Rem 700 7mm-08 with a Leupold VX2 3-9X40 and the DNZ’s are mounted on a CA Ridgeline 300 PRC with a Vortex Razor HD AMG. Again, both have performed well. My most recent purchase...

If you were to mate an action and barrel that uses a small shank Savage fit,... 1) is there a particular barrel nut you would recommend? 2) would using some anti-seize be a good thing? (I'm assuming the answer is "no" but I'm wondering why.)

My local gun shop got a used Barrett MRAD in 338 Lapua Magnum that's topped with Leupold mk4 in 4.5-14x50mm and an additional 20" 308 Winchester switch barrel. The owner knows me well enough and said he'd be willing to trade me the Barrett straight up for my Savage 110 FCP HS Precision in 338...

I'm in the process of gathering parts for an Origin build. I would like this to be done with the barrel nut so I can work on it myself (I've done Savage barrel swaps). I currently have a McMillan Gamestalker that has the Remington Sendero inlet. My question is, will I be able to easily sand...

Got a project.. How might I easily determine necessary length for pillars ? I bought a Savage short action from NSS, has hinged floor plate mag. Is there an easier way to find this besides T&E ? Cause, that is gonna take some time !! Also, how close to the bolt should the mag feed lips come ...

Ok , say I'm lazy, but I have been using the search function for days now, and am still no closer to a solution than I was when I started, that being a simple fix I can perform for primary extractor woes on a Savage 110. I've seen guys say they drilled and tapped the rear baffle, installing and...

Hey everybody. So I'm looking to buy a rifle that is a good all around long range hunting rifle. Something that can reach out 1000 yards and kill am elk with confidence. But also a gun I would mind taking a pronghorn with. I'm looking to buy one stock, not build. Right now I'm looking at the...

I just put a deposit down on a LA SR3 with a mag bolt face. I'm looking to have a lightish switchbarrel hunting rifle. I want to run a 300 win mag and a 7wsm or 6.5 SUAM/PRC or whatever but for sure the 300 win mag will be the first barrel. I want to use proof carbon barrels to keep the weight...

I decided to get me a new gun. I really wanted to get something I could shoot a lot and work on my load development, reloading and shooting skills. I decided to get a savage 12fv in .308. It seems like a good deal and will fit what I wanted to do with it, plus be a good staring point to build...

Hello all, First post on here so if there are any rules I end up crossing please let me know, I’ll get it fixed ASAP. I also tried searching the threads, but couldn’t quite find what I was looking for as most questions weren’t related to suppressor use. Question: What barrel length for 300...

Last winter, I found a great deal on an old Savage 11 .22-250 and decided to try my hand at my first barrel swap. Ive always wanted a heavy barrel .243, so I found a factory takeoff, ordered a new nut and some go/no go gauges and did the swap. I put the barrel on myself and I just want to...

I have a large shank Savage 111 7mm RUM barrel that I have been hoping to do a build with for some time, but I have been unsuccessful in finding a action that will fit it. Does anyone have any suggestions on what aftermarket actions I might be able to use to get this project started? Thanks!

So I followed the instructions from Berger (also found on this forum) and performed the seating depth test. I didn't do the 6 rounds of each like they mentioned but only done 3 rounds of each. The results were shocking to say the least but I think I found my best COAL. Shooting a Savage 111...