eld-x

  1. Petey308

    ELDM vs ELDX (construction-wise)

    It seems like this is always a common debate and topic. So I wanted to make my own thread on the matter, showing the comparisons between the Hornady ELDX and ELDM. They’re not the same and are actually both improvements on two other Hornady bullets. The ELDX is simply just an improved SST and...
  2. jshepherd61

    For long range hunting only! We don’t discuss match components!

    Ok not trying to be a jerk, I shoot matches also, but since it’s getting close to hunting season and this is a ELR site. Let’s discuss Magnum calibers and hunting components you plan to use. I know there must be people settling on components that they can find VS what they normally use! I know I...
  3. G

    308 ammo for elk (barrel length)

    Hey guys, I'm looking at getting a Sig Cross in a 308. The Cross is a 16inch barrel and I will have it suppressed. With the shorter barrel length, I'm debating what factory ammo would be best out of that shorter inch barrel for elk. This will be my first Elk hunt and the outfitter is advising...
  4. Porcupine

    6.5 CM Load RL 17 19 22

    Hey guys, I have searched the site for 6.5 CM loads and there is a lot. But I’m specifically looking for trusted loads with Reloader 17, 19, or 22. I’m loading up 143 g ELD-X’s. Thanks for the help
  5. Porcupine

    270 WSM Load Help

    Hey guys, pretty new to reloading and having trouble coming up with a good load for my Kimber 8400 270 WSM. So far I have been using 145g ELD-X with RL-22 & 17. My gun would shoot factory AB well so I’m thinking of ordering a box of 150g LRAB. Thoughts or help is greatly appreciated
  6. BoatTail

    7mm WSM, 162 gr bullet, RL26, 3170 fps?

    I have been considering a number of short action WSM cartridges to build a rifle around for sheep hunting and just a lighter carry. I recently found Alliant is showing that the 7mm WSM with 162 grain bullets and reloader 26 is able to obtain 3171 feet per second out of a 24-inch Barrel. This is...
  7. H

    162 eld bearing surface?

    Anyone have some the Hornady 162 eldm or eldx bullets they could get a bearing surface measurement on for me? Thanks!
  8. S

    New member

    Hello New member from Wyoming. Enjoy shooting and reloading with my children. How it the hornady 178 eld-x for an elk round out of a 300 win mag?
  9. lovec_1

    Not the first time... 7mm Rem Mag - issues with ELD-X 175gr.

    Hi guys, hereby I'm asking for any help. Here is the story: I shoot older Sako rifle, it has 24.5" long factory varmint barrel with 8.66" twist. Last two seasons I've shot Berger Hybrid 180gr. very successfully. But I love to try always something new and different. So I bought two boxes of...
  10. Mc Fraser

    N570 and 200/212 ELD-X Load Data for 300WM

    Hello, I reached out to Hornady and they don't have any reloading data, I'm still waiting on VV to get back to me; in the meantime what have you used as a starting point for a ladder test? I have a 300WM, 28in barrel Krieger #5
  11. Overkill338

    ELD-X NOT recommended under 400 yards.

    I emailed Hornady, after we had that huge debacle about Brown bear with the ELD-X. I was curious why they recommended the SST from a .338 WM, and the 220 Interlock from a 30-06, when the 200,212,and 230 ELD-X is not. Even the 270gr in the Lapua isn't recommended for brownies.
  12. Mitchelldekok

    7mm load recommendations

    Hey, Anyone here ever do the 7mm rem mag ELD-X 175 GR with H 1000 ? And if so, what would you recommend for a starting load charge?
  13. brinker19

    Specific Hornady ELD-X Performance

    I had a bad experience with a 7mm and Berger 168 on an elk. He was slightly quartering toward me, and I put two into him. Based off sightings on private a few weeks later, it appeared I hugged too far forward and they didn't get past the shoulder... I had a 30 Nosler built for other reasons...
  14. Timber338

    338 270gr ELD-X

    I’ve wanted to start a dedicated thread for anybody with experience shooting the 338 270gr ELD-X. It does not seem that many people shoot this bullet. Maybe we can dig up some field results. What cartridge, powder, seating depth, muzzle velocity, etc, are your shooting? How accurately are...
  15. T

    178 gr eld-x in 30-06

    Hi all. A good friend of mine if going to have his Tikka T3 rebarreld shortly in 30-06. He's asked me to reload for him. So i have a few question to those of you that are shooting the 06 with the 178gr ELD-x 1)What coal are you running? 2)If it's a custom barrel was it throuted for them and if...
  16. SofaKing

    280 Ackley Improved loads with Hornady ELD-X 150gr 7mm

    Anyone used the the 7mm 150gr ELDX bullets in there 280 AI? Just got a box from Cabelas and checked my Hornady book and I don’t see any data for these bullets. Any help or hunting experience would be great.
  17. SofaKing

    Hornady 212gr ELD-X loads for 300 win mag

    Recently ordered a box of the 30cal 212gr ELD-X hunting bullets. I’m wondering if anyone has load data for 300 win mag with H1000? I’m going to be using new Nosler brass too. If you’ve used these how’d they perform?
  18. CB11WYO

    .284 175 ELD-X on Deer at 600 Yards - PICS

    Hey all, Killed my first animal after switching to the 175 gr ELD-X, small mule deer buck at 600 yards. Impact Energy: Approx. 2300 ft/lbs Impact Velocity: Approx. 2400 fps Although this was a heart/lung shot, the deer dropped immediately after being hit, exactly like animals I have...
  19. P

    .300WSM W/178gr ELD-X H1000 Powder Help!!

    I have looked everywhere for load data on .300WSM using 178gr. Hornady ELD-X bullets and H1000 powder. Does anyone have anything that can help me?? Thx!!
Top