• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Brass trimmer recommendations

..I bought a Forrester gold trimmer with all the accessories back in the 70's and its served me well over countless uses..guess there's no reason to change at this point..
 
I've got several different types and I love my Lyman Case Trim Rxpress. It comes with 10 dies that fit most of the popular cartridges. Extremely accurate and fast.
image.jpg
 

Attachments

  • image.jpg
    image.jpg
    334.1 KB · Views: 13
Thanks for all the responses it's much appreciated. But I mostly I load for hunting rifles but I do have a dasher and a 223ai just for long range plinking so total probably close to 6-700 brass will need to be trimmed at some point. I understand Giraud will be the most efficient in time but as far as consistency goes is it that much better or am I mostly gaining less trim time
 
Thanks for all the responses it's much appreciated. But I mostly I load for hunting rifles but I do have a dasher and a 223ai just for long range plinking so total probably close to 6-700 brass will need to be trimmed at some point. I understand Giraud will be the most efficient in time but as far as consistency goes is it that much better or am I mostly gaining less trim time
if all of your brass is sized identically, and you trim to the smallest length piece, you will have brass within 1-2 thousandths with giraud. Remember, Giraud indexes off of the shoulder, so all of your necks end up within 1-2 thousandths. Your overall may be different if the cases aren't identical. With the Giraud you will have great consistency along with speed. I have Lyman hand and drill powered cutters, a black widow 2, a couple rcbs cam lock, hand-crank style trimmers and I replaced it all with the Giraud. 1 cutter per caliber so there is no messing around with cutter settings. I wasn't impressed at first, then I realized when I set the cutter I set it backwards, Lol. It works amazingly well now.
 
I also use the Lee trimmers. I have a drawer full of them. I chuck up the case holder in my cordless drill and hold the pilot/cutter with a tiny vice grip plier. I trim after sizing if the brass needs trimming. It may not be the best, fastest or most accurate system but it is what I have and it works for me. YMMV
 
Top