Frank in the Laurels
Well-Known Member
- Joined
- Jul 15, 2007
- Messages
- 2,018
..I bought a Forrester gold trimmer with all the accessories back in the 70's and its served me well over countless uses..guess there's no reason to change at this point..
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Brass trimmer recommendations
- Thread starter Teekerguy
- Start date
Help Support Long Range Hunting Forum
jlphillips1
Active Member
Teekerguy
Well-Known Member
Thanks for all the responses it's much appreciated. But I mostly I load for hunting rifles but I do have a dasher and a 223ai just for long range plinking so total probably close to 6-700 brass will need to be trimmed at some point. I understand Giraud will be the most efficient in time but as far as consistency goes is it that much better or am I mostly gaining less trim time
Sdvldog1371
Well-Known Member
if all of your brass is sized identically, and you trim to the smallest length piece, you will have brass within 1-2 thousandths with giraud. Remember, Giraud indexes off of the shoulder, so all of your necks end up within 1-2 thousandths. Your overall may be different if the cases aren't identical. With the Giraud you will have great consistency along with speed. I have Lyman hand and drill powered cutters, a black widow 2, a couple rcbs cam lock, hand-crank style trimmers and I replaced it all with the Giraud. 1 cutter per caliber so there is no messing around with cutter settings. I wasn't impressed at first, then I realized when I set the cutter I set it backwards, Lol. It works amazingly well now.
Russ661
Well-Known Member
I also use the Lee trimmers. I have a drawer full of them. I chuck up the case holder in my cordless drill and hold the pilot/cutter with a tiny vice grip plier. I trim after sizing if the brass needs trimming. It may not be the best, fastest or most accurate system but it is what I have and it works for me. YMMV
I use the LE Wilson with a small, low speed electric screwdriver attached. Works great, incredibly consistent results and plenty fast for me.
