• You must be a Supporting Member to create a listing in the Long Range Hunting Marketplace. To read all the rules, click here.

    We offer multiple options to become a Supporting Member here.

  • If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

SOLD/EXPIRED Defiance 7saum proof prefit 24”

6.5saum/300rum

Well-Known Member
Joined
Dec 5, 2020
Messages
1,296
Location
montague, ca
24" proof prefit 7saum barrel 1-8.4 twist barrel for sale. I bought this to play with while I waited for my 6.5 saum barrel. 35 rounds fired it looks like it will shoot 175 Berger elite hunters really well with n565 or rl23 in the little bit I shot it. This is a prefit for the defiance classic, ruckus, anti and anti x actions. I have 3 boxes of new adg brass same lot number brass to sell with the barrel. Barrel only $650 delivered
 

Attachments

  • IMG_7265.jpeg
    IMG_7265.jpeg
    156.5 KB · Views: 121
  • IMG_7264.jpeg
    IMG_7264.jpeg
    173.5 KB · Views: 121
Last edited:
How much additional for the brass? Do you have any pictures of the groups it produced?
 
How much additional for the brass? Do you have any pictures of the groups it produced?
I didn't take any pictures of groups I was just trying to break in the barrel and find pressure. I was working up in .5 grain increments to find pressure with 4 different powders. I do remember that with 175 Berger's and n565 from 64-66 grains 5 shots (.5 grain increments) it was well under an inch with the 2 grain range of powder. It was the same with rl23 but that was with 60.5-62.5 grains. I don't think it will have any problem shooting .5 Moa with either of these. I can look at my notes and give velocity's if you want?

I'd sell the brass for $275 delivered for the 3 boxes.
 
I'd love to see those velocities if it's not too much trouble.
Sorry about my terrible writing the left side is 175 Berger elite hunters and the right side is nosler long range accubonds, the bottom line on both sides had a slight bolt click they were max loads at pressure. Both were seated short enough to fit in short action and federal 210m primers were used.
 

Attachments

  • IMG_7330.jpeg
    IMG_7330.jpeg
    449.5 KB · Views: 40
Top