elkaholic
Well-Known Member
If it was fired in the old chamber, you don't want to try to size it to B
25 SHERMAN (THE LATEST LASER)
- Thread starter elkaholic
- Start date
Help Support Long Range Hunting Forum
Oh I know. I wish I could size it down and I wouldn't be in the situation I'm in. I don't want to go the route of an /A chamber reamer just to use 97 pieces of A chamber used brass.
Michael Hirschi
Member
You have some good info it seems for loading the 25 Sherman LA. Can you share more details on all the options you've tried? Thank you very much.
wildcat westerner
Well-Known Member
- Joined
- Nov 14, 2009
- Messages
- 732
Hello Richard,
It would seem that Michael Hirschii is getting the best of this cartridge with his use of powders and also he won't be getting anymore increase until he switches to RWS brass, It took mw 2+ years to finally locate some of this brass, cost me an arm and a leg, and was worth it in terms of ballistics. Is the flatter trajectory on these much heavier .25 caliber bullets really superior to the 140 ish bullets of the 6.5 Sherman?
It would seem that Michael Hirschii is getting the best of this cartridge with his use of powders and also he won't be getting anymore increase until he switches to RWS brass, It took mw 2+ years to finally locate some of this brass, cost me an arm and a leg, and was worth it in terms of ballistics. Is the flatter trajectory on these much heavier .25 caliber bullets really superior to the 140 ish bullets of the 6.5 Sherman?
Michael Hirschi
Member
This is Michael Hirschi, I am not the one getting the best of this cartridge. I think that is dworrel. I'm trying to glean any knowledge I can from him to help me achieve the best of the 25 Sherman LA. If you have any load info I would be very grateful for it. I do need some better brass for sure. Thank You
If I can offer good advice, don't skimp on barrel length.
Mine is 27.5" and I wish it had more.
Mine is 27.5" and I wish it had more.
elkaholic
Well-Known Member
Yep, with a 26+ barrel, it will run with a WM.
elkaholic
Well-Known Member
You're rifle could be different so start low, but about 64 N570 with a 150 class will scoot!
Start at 62 and you may get up as much as 65 ish?
Petersen brass is the best way to go, 270, 280, 280 AI are all good.
140 to 156 class bullets are best or somewhat lighter monos using a faster powder.
Michael Hirschi
Member
Should I use magnum primers? Thanks a million
You could probably get away with regular large rifle primers BUT if you have magnums that's what I would start with. You are dealing with a long powder column and slow powders.
Definitely use Magnum primers.
ethangroenig
New Member
Elkaholic what's best way to get in touch with you? Interested in 6.5 Sherman or 6.5 SS. 208-315-0005 is my number
Justice1327
Well-Known Member
Have you reached out to Derek and Tyler?
New owners of Sherman Wildcats
ethangroenig
New Member
No. How do I get in contact with me?
