Scope problems

100percent said:
I hate to add insult to injury but, those pump and semi model Remingtons!!! Oh boy…..
Click to expand...

Goodness and wowzers 😳How can ya'll hate the old pump action Remingtons. I had a Model 760 Gamemaster in 30-06 with a 4x9 Leupold scope. My dad got it as a loan payment when I was a kid (or something, I haven't been a kid in a very long time). The first time I shot it I thought... well... I can't put what I thought here. It'll turn it to stars. Lots and lots of stars. I'd equate it to being run over by a bull or something painful like that. I was trying to sight it in. I finally gave up and asked a friend of mine (big ole boy) to sight it in. He shot it once, let out a bunch of stars, then told me to sight it in my own 'stars' self. Out of the kindness of my heart I gave it to my younger sisters husband (also a big lad). Knowing him he sold it. That rifle sucked...
 
Make sure there are no paint bubbles on rings and bases that you already have. I once had a 40 MOA "paint bubble" on a set once. Shaved it off and everything was fine after that.
 
Hard H2O said:
Depends on the use. Minnesota deer hunting probably fine depending. As long as it groups minute of deer.
Click to expand...
Truth. I know a family in the UP of MI. They get a lot of 30 yards and under shots.(50-60 is a long shot to them) Most of them use levers and autos. They have really small clearings they sit in and shots happen fast.
 
Sometimes when a grand son, nephew, cousin or some such of a friend pulls into my driveway with similar issues wanting me to fix it I feel the same way. Toss it in a closet, close the closet door, go to your local GS and buy a Ruger American, savage or a number of other brands that will shoot lights out for you. I'm getting to old and grouchy for this stuff.
 
100percent said:
I hate to add insult to injury but, those pump and semi model Remingtons!!! Oh boy…..
Click to expand...

I thought that Mikecr was pretty harsh (OK real harsh) with his response, then later while rereading all of the posts…..I found that I had missed the rifle.

Mikecr may have the best solution! Remove the scope……call it a heavy timber rifle! 😉 memtb
 
A-Tip said:
This is a gun that i worked on for a friend. Its an older remington semi auto 243. Its a weaver style rail now with flathead screws. I dont know much more then that right now. It looked like it may have been 0 moa. It has new leupold medium rings. There's not enough elevation.
Click to expand...
Try low rings? The scope height might jus be too big. Unless its a big obj and wont fit low rings will gain a lot of leeway. Im with whoevser said the mounts might be reversed. That rifle design isnt old enough to be this hard to scope.
 
Last edited:
Check where you are in the windage travel. If you are maxed out or near maxed out on windage, you will have very limited elevation. If that is the case, then maybe you can remount the rail with an eye toward getting it aligned with the bore. Just depends on how it fits the top of the receiver. (Just looking for solutions that don't involved too much muckery.)
 
HuntingBronco said:
Check where you are in the windage travel. If you are maxed out or near maxed out on windage, you will have very limited elevation. If that is the case, then maybe you can remount the rail with an eye toward getting it aligned with the bore. Just depends on how it fits the top of the receiver. (Just looking for solutions that don't involved too much muckery.)
Click to expand...

I have seen receivers that had the holes drilled in a pattern not parallel to the bore. Last one I had like that I used Leupold Adjustable bases.
 
A-Tip said:
If my runs out of adjustment and im still not sighted in, what do you guys recommend i do? Its on an older nikon.
Click to expand...
If that happens, and I have seen it before. The first thing to do is take the scope, mounts and rail off of the rifle, place them on the cleaning pad in front of you and give them the once over, especially the rail to make sure you don't have a 20 moa rail put on backwards. You can do that with some rifles. Reinstall everything, paying close attention to what you are doing. If it's still off, then take it off, save the rings and throw it away and buy a new scope. Nikon is out of the rifle scope business. Repair is out of the question.
 

Similar threads

D
scope mounts problems
Replies
0
Views
1K
drewman
D
B
Possible scope problem?
Replies
6
Views
2K
kc
K
A
Load or scope problem ?
Replies
5
Views
1K
11bono
1
RG300WSM
Triggertech problems
Replies
0
Views
365
RG300WSM
RG300WSM
Payton R Tecca
Elevation problems!
2 3
Replies
31
Views
6K
emp1953
E

Recent Posts

Top