Nomad Ti vs LTi for elk rifle

I'm leaning towards the Ti XC for a shorter length and less weight on an 18" 7PRC.

Check out this if you want to see how they compare but both look awesome. It would come down to what target weight and length you will be happy with.

I don't know for sure but I would check to make sure that suppressor can handle a magnum 18" barrel, some list 20" as the shortest. I would call a double check for piece of mind.
 
I'm leaning towards the Ti XC for a shorter length and less weight on an 18" 7PRC.

Check out this if you want to see how they compare but both look awesome. It would come down to what target weight and length you will be happy with.

I don't know for sure but I would check to make sure that suppressor can handle a magnum 18" barrel, some list 20" as the shortest. I would call and double check for peace of mind.
 
Last edited:
My email to Dead Air….

"
What are the barrel restrictions for a magnum cartridge with the Nomad Ti XC (direct thread)? I am considering it for an 18" 7mm PRC.

Thank you"

Response:

"As long as you're above 12.5 in barrel you're good to go!"
 
I have Dead Air Nomad, Nomad L, and DD Enticer STI. All are great, I wouldnt hesitate to buy any of them again, although the DD is the way I will go due to price. As far as sound suppression between the short and long Nomad, you may not notice it until you put it on an overbore magnum. I noticed this when I ran them on my 6.5-300 Wby, big difference.
 

Recent Posts

Top