Custom Remington M7

C

casey36

Well-Known Member
Joined
Feb 27, 2011
Messages
92
Location
clarion,pa
Going to build a short, stand gun for whitetails here in PA. Pretty much decided what it's going to be, just wanted to see if anyone had thoughts were i could go better.
I already have the donor M7 rifle with a Timney trigger.
Going with a 23" 1-10tw. Hart barrel. Remington mag. contour.
H.S. Precision stock.( I know, I just like them)
Leupold 2.5-8 V-3 with the CDS.
Talley one piece.
Cerracoated to match the scope.
Anything I'm missing?
Here comes the grief, it will be a std. 7mm-08.
 
Last edited:
Haha hey man, if it's what you like, don't worry. You'll never please 'em all. I just built a little woods gun myself on a Savage action in 6.8 SPC, I know there's a hundred better rounds to build up but the smile on my face when I shot it yesterday was worth it to me.

Do you plan on using factory trigger? Do you have the bottom metal figured out? What do you plan on shooting out of it with the 10 twist for bullet weights?
 
thatguyshm said:
Haha hey man, if it's what you like, don't worry. You'll never please 'em all. I just built a little woods gun myself on a Savage action in 6.8 SPC, I know there's a hundred better rounds to build up but the smile on my face when I shot it yesterday was worth it to me.

Do you plan on using factory trigger? Do you have the bottom metal figured out? What do you plan on shooting out of it with the 10 twist for bullet weights?
Click to expand...
The donor rifle i have has a Timney on it already. Probably going to stick with 120gr. Nosler BT, 120gr. Barnes, and 140 AB'S for anything else. Bought the gun originally as my old man gun. Leupold 1-4 vx-2, Talley light wts., Booney packer sling. Couldn't make it much lighter. Shoots great. Just wanting one with a bit more muzzle weight and a bit more velocity. I'm using the Remington bottom metal. I'm sitting in my stand more than walking these days, due to severe arthritis in my back. The extra weight won't matter and if I need more bullet, I've got 20-30 heavier calibered rifles. I've often said i could get by in North America with my 7mm-08, 7mmSTW, and my .338 Jarrett. Maybe throw my .45-70 in once in awhile just cause I like it!
 
Last edited:
That sounds like a complete rifle to me! With a 10" twist you may even be able to get good groups out of the 150gr eld. I've always liked the 7-08, just never owned one.
 
thatguyshm said:
That sounds like a complete rifle to me! With a 10" twist you may even be able to get good groups out of the 150gr eld. I've always liked the 7-08, just never owned one.
Click to expand...
I'm still debating a 9 twist or the 10 twist. I will mainly shoot 120 grn. Noslers and Barnes out of it. I've had great performance from both bullets in a couple of M7, 7MM-08 rifles. If I remember correctly the factory twist is 9.5. I may be wrong, but that's what is sticking in my head.
 
Interesting, my own 7-08 was going to be a Howa 1500, but I sold it to fund a REM 700 SPS Stainless in 308 that was cheap, old stock NIB at the importer. It is now 7-08 and 6.5x47 running 8" twists in both.
Yours will be lighter than mine and I still haven't decided on a replacement stock yet.
I wouldn't go 9" twist even if you only shoot the 120g, you may like a Barnes in the future and faster twist increases terminal ballistics effect.

I like your cartridge choice.

Cheers.
 
I am a big fan of the 7-08. If it were mine the only thing I would change is go to a faster twist (either 1:8" or 1:9") and go a bit shorter with the barrel (most likely 20"). To me, a Model 7 shouldn't have a barrel longer than 20".
 
HandgunHTR said:
I am a big fan of the 7-08. If it were mine the only thing I would change is go to a faster twist (either 1:8" or 1:9") and go a bit shorter with the barrel (most likely 20"). To me, a Model 7 shouldn't have a barrel longer than 20".
Click to expand...
I am still debating twist. Calling Hart tomorrow, I'll probably never load over a 140gr. in this rifle. 1-10 would work for me. I don't mind a few extra inches on the barrel, 23"" is basically just .20" longer than a loaded round on top of a factory barrel. I just want a little more velocity and more importantly, I want some weight out front.
 
I would never go 10" twist on a 7mm, it just isn't optimal, 9" is the slowest I would go.
Been doing this building thing for a good while. Faster twist always sees a huge improvement in several factors, especially terminal ballistics.

Cheers.
 
MagnumManiac said:
I would never go 10" twist on a 7mm, it just isn't optimal, 9" is the slowest I would go.
Been doing this building thing for a good while. Faster twist always sees a huge improvement in several factors, especially terminal ballistics.

Cheers.
Click to expand...
I'm only going to shoot 120gr. in this gun. I have a 9.5 on my STW and it's a bughole gun with anything. I also don't go over 160gr. in it. I don't need heavy for caliber bullets in these. I have plenty of other rifles to sling big, heavy bullets. Pretty much have it covered from fast
338's up to .45cal.
 
The faster twist isn't just for heavy bullets, long bullets for weight, like Barnes often provide much better accuracy spun faster even though it's not necessary for stability.
Just a thought for you to ponder.

Cheers.
 

Similar threads

25 Otter
M7 question.
Replies
4
Views
1K
MudRunner2005
MudRunner2005
R
Remington Custom Shop
Replies
7
Views
11K
Roninco
R
C
Remington custom build
Replies
3
Views
2K
midwesthunter
M
1
custom remington 700
Replies
1
Views
1K
1denogean
1
R
Remington Custom Shop
Replies
4
Views
3K
mtnwrunner
M

Recent Posts

Top