Lightest 223 suppressor for hunting

huntsman22 said:
You need more than 2..... Rimfire, pistol, shotgun. And more than 1, of each.
Click to expand...
I started with one that will take care of anything over .244, and less in a pinch, and my goal is to add one for the .244 or less realm next. Already had a .22lr.

And thanks to JK Armament, and some others, the shotgun will be forthcoming afterwards. Lastly will be for pistol calibers or large bore calibers like .338.
 
marksman1941 said:
That's a good point. The reality is I would run the heck out of a 375 can if I had one, but really I'm trying to figure out whether said 375 can would work well enough on my 223, or do I just need 2 new cans
Click to expand...
It certainly wouldn't NOT work, and I'll never advocate for "just buy both" if your budget today can't support that.

But a few points of consideration:

A 375 bore would be far better serves with a larger volume can versus what is essentially a K can for that caliber.

A 375 will require a larger thread pitch and permanent shoulder be added to your wife's rifle, whereas the 6 ARC can go 1/2x28, or my preference a 5/8, one of those is likely what comes on the rifle already.

If you decide to do a mount swap on the can instead, you'll need to buy an extra mount (if it doesn't come with one). You'll also need to buy the extra end cap.

You also really want your components assembled and torqued down consistently, and torqued onto the barrel so it doesn't back off. To swap from one rifle to the other, you'll need to pop the barrel threads, then wrench off what would likely be carbon-locked mount and end cap, install the new ones, and wrench back into the new barrel.

And since you already have a silencerco, you know you're not doing that at the range because the can gets too hot.

None of which are insurmountable issues, but it's very reminiscent of the "buy one $3k scope and a QD mount, and use it for all of your rifles" marketing jargon of 10 years ago. You can make it work, but you're compromising at both ends, and the manufacturers know that the inconvenience will ultimately lead you to buy one for each rifle anyway.

If you have the expendable funds available, get a svelte, sexy can that will live on your wife's gun, be it a 6mm or 30 cal, then one that would truly impress you on the 375. Just my opinion.
 
khart1988 said:
It certainly wouldn't NOT work, and I'll never advocate for "just buy both" if your budget today can't support that.

But a few points of consideration:

A 375 bore would be far better serves with a larger volume can versus what is essentially a K can for that caliber.

A 375 will require a larger thread pitch and permanent shoulder be added to your wife's rifle, whereas the 6 ARC can go 1/2x28, or my preference a 5/8, one of those is likely what comes on the rifle already.

If you decide to do a mount swap on the can instead, you'll need to buy an extra mount (if it doesn't come with one). You'll also need to buy the extra end cap.

You also really want your components assembled and torqued down consistently, and torqued onto the barrel so it doesn't back off. To swap from one rifle to the other, you'll need to pop the barrel threads, then wrench off what would likely be carbon-locked mount and end cap, install the new ones, and wrench back into the new barrel.

And since you already have a silencerco, you know you're not doing that at the range because the can gets too hot.

None of which are insurmountable issues, but it's very reminiscent of the "buy one $3k scope and a QD mount, and use it for all of your rifles" marketing jargon of 10 years ago. You can make it work, but you're compromising at both ends, and the manufacturers know that the inconvenience will ultimately lead you to buy one for each rifle anyway.

If you have the expendable funds available, get a svelte, sexy can that will live on your wife's gun, be it a 6mm or 30 cal, then one that would truly impress you on the 375. Just my opinion.
Click to expand...
I appreciate the info! It is quite helpful. Expendable funds aren't unlimited, so I am currently looking at a single can. Another down the road is possible, but right now I'm just getting one.

Ironically my wife doesn't even shoot. She just thought it would be nice for me to have a suppressor so that she didn't have to wear ear pro if I were to shoot at a deer while she was around.

I think the raptor can would work fine for a .375 jaguar, as that's a low volume case. It's just a .308 necked up to .375. However, it does make sense that a larger internal bore would be less effective at suppressing a 223 bullet even with the proper end cap installed.

The mounting is less of an issue for me. I have ASR mounts for my omega, but for the next can I plan to save the weight and direct thread. A 5/8-24 thread pitch fits almost every threaded barrel I own, and I have a couple 1/2-28 to 5/8-24 adapters for the skinny barreled fellas.
 
I have 4 cans...so far.

Two .308 cal cans (TBAC Ultra 9 & TBAC Dominus) I run on 22GT, 223 Rem, 6CM, 25SST, 6.5SS, 7SS, 300PRC

Two 6.5mm cans (TBAC Ultra 7 & TBAC Ultra 7 Gen 2) I run on 22LR, 5.56NATO, 25CM, 25CM, 25MBK, 25PRC/SI, 6.5SLR, .260AI, .260AI, 6.5SS, 6.5PRC/SI

I think my next can will be a TBAC Ultra 5 Gen 2.
 
Last edited:
marksman1941 said:
Humorously neither the Raptor nor the lithium are available to order right now
Click to expand...

Otter Creek Lithium - Capitol Armory

<p><strong><span style="font-size: medium;">ULTRALIGHT PCC SUPPRESSION</span></strong></p> <p><span style="font-size: medium;">The Otter Creek Lab's Lithium is a lightweight titanium silencer optimized for use on pistol-caliber carbines and subguns.&nbsp
www.capitolarmory.com www.capitolarmory.com

www.silencershop.com

AB Raptor 8 - 7.62MM - Silencer Shop

AB Raptor 8 7.62mm The Raptor is AB Suppressor's flagship silencer comes in a variety of lengths/configurations that serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners endure. The Raptor 8 uses AB Spiral Technology which is d
www.silencershop.com www.silencershop.com


Looks like they have a few on hand.
 
sneedb82 said:

Otter Creek Lithium - Capitol Armory

<p><strong><span style="font-size: medium;">ULTRALIGHT PCC SUPPRESSION</span></strong></p> <p><span style="font-size: medium;">The Otter Creek Lab's Lithium is a lightweight titanium silencer optimized for use on pistol-caliber carbines and subguns.&nbsp
www.capitolarmory.com www.capitolarmory.com

www.silencershop.com

AB Raptor 8 - 7.62MM - Silencer Shop

AB Raptor 8 7.62mm The Raptor is AB Suppressor's flagship silencer comes in a variety of lengths/configurations that serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners endure. The Raptor 8 uses AB Spiral Technology which is d
www.silencershop.com www.silencershop.com


Looks like they have a few on hand.
Click to expand...
They have the 7.62 raptor, not the 375 8 stack
www.silencershop.com

AB Raptor 8 - .375/Multi-Cal - Silencer Shop

AB RAPTOR 8 - .375/MULTI-CAL The Raptor is AB Suppressor's flagship silencer that comes in a variety of lengths/configurations that serve as a solution to the multi-gun and multi-caliber dilemma suppressor owners endure. The Raptor 8 uses AB Spiral Techno
www.silencershop.com www.silencershop.com

Thanks for the capitol armory link on the Lithium!
 
I have a Scythe-Ti that I have used on 223/25Prc/30 NOS. It weighs 7.3 oz. Zero complaints.
Rated to 300 Rum with no barrel length restrictions.
 
marksman1941 said:
I appreciate the info! It is quite helpful. Expendable funds aren't unlimited, so I am currently looking at a single can. Another down the road is possible, but right now I'm just getting one.

Ironically my wife doesn't even shoot. She just thought it would be nice for me to have a suppressor so that she didn't have to wear ear pro if I were to shoot at a deer while she was around.

I think the raptor can would work fine for a .375 jaguar, as that's a low volume case. It's just a .308 necked up to .375. However, it does make sense that a larger internal bore would be less effective at suppressing a 223 bullet even with the proper end cap installed.

The mounting is less of an issue for me. I have ASR mounts for my omega, but for the next can I plan to save the weight and direct thread. A 5/8-24 thread pitch fits almost every threaded barrel I own, and I have a couple 1/2-28 to 5/8-24 adapters for the skinny barreled fellas.
Click to expand...
Sure thing!

I've gone direct thread because you shave off almost a quarter pound, especially with something like a Diligent Defense or Reardon titanium adapter, from an ASR and muzzle device.

Another option for your wife's rifle is to buy a thread adapter for the bigger mount if her gun is threaded. They are normally around $30 plus thread adapter, then you can just throw the silencer on when she wants to shoot.

Get one with wrench flats so you can really crank that sucker on. It would be the same concept as having a Smith install a shoulder but is more removable, cheaper, and would just look a little less refined.
 
khart1988 said:
Sure thing!

I've gone direct thread because you shave off almost a quarter pound, especially with something like a Diligent Defense or Reardon titanium adapter, from an ASR and muzzle device.

Another option for your wife's rifle is to buy a thread adapter for the bigger mount if her gun is threaded. They are normally around $30 plus thread adapter, then you can just throw the silencer on when she wants to shoot.

Get one with wrench flats so you can really crank that sucker on. It would be the same concept as having a Smith install a shoulder but is more removable, cheaper, and would just look a little less refined.
Click to expand...
I think for the moment I'm going to run a 1/2-28 titanium direct thread and a .223 titanium end cap on my omega while I try to find the right standalone can.
 
huntsman22 said:
The juice ain't worth the squeeze to bother to swap endcaps on the Omega. Just not enough difference in sound to justify it. btdt....
Click to expand...
It was more to drop the weight of the anchor break and the ASR/muzzle device than to change the sound quality. It's only on a 223 so I'm not as worried as if it were a big magnum
 

Similar threads

G
Lightest barrel for use with suppressor
2
Replies
16
Views
13K
JTComfort
JTComfort
wildwilderness
Lightest smallest Suppressor? MT rifle build
3 4 5
Replies
65
Views
11K
QuietTexan
QuietTexan
J
Suppressor with a compensator for hunting?
2
Replies
15
Views
1K
EmanP
E
H
Hunting with and without suppressor?
2 3 4
Replies
42
Views
4K
Philward
Philward
S
First hunt with a Suppressor
Replies
4
Views
676
Huntnpack
H

Recent Posts

Top