Silver_Is_Money
Well-Known Member
Has anyone tried either of these powders in their 6.5mm Sherman Long (the one formed from .270 Win. brass)?
-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
Ramshot LRT and/or US 869 in a 6.5 Sherman Long?
- Thread starter Silver_Is_Money
- Start date
Help Support Long Range Hunting Forum
Brandon.in.parts
Well-Known Member
I use RL23 in my Dad's 270 Sherman. Running 148gr Hammers at 3000'.
Bullet?
Silver_Is_Money
Well-Known Member
140 grain SP or BTSP types.
It's not a typical bullet/powder combination that 6.5 Sherman owners load, but here's a baseline that might help you: https://shermanwildcatcartridges.com/sherman-load-data. You might also use loads for 6.5-06 (https://hodgdonreloading.com/rldc/?t=1). LRT and US869 might be too slow, but it does not mean it will not work. Good luck!
Silver_Is_Money
Well-Known Member
Would you know if Ramshot LRT is as slow burning as US 869?
US869 is much slower.
SOURCE: https://hodgdonpowderco.com/wp-cont...mokeless-Relative-Burn-Rate-Chart-WEBSITE.pdf
oldfamily
Well-Known Member
Ramshot magnum or reloder 26 has produced the best results with Berger bullets ranging from 140 to 156.
KMG
Well-Known Member
I had to go back & check my records as I knew I ran a pressure test with LRT in my 6.5SS. I ran 62-70grs. with a 160 Matrix, Norma brass, WLR primer, & no issues in my set up. Slightly flat primer but no stiff bolt lift & all went in about a 1 MOA group @ 100yds. I never went further to develop a final load development.
