Shooting bullets with moly cleaned off

newmexkid

newmexkid

Well-Known Member
LRH Supporter
Joined
Apr 11, 2011
Messages
1,247
Location
NV.
Possibly have a chance to purchase some Sierra bullets that came moly-coated from the factory. The seller has removed the moly as best he could. I searched the forum and there are many pages on removing the moly. However, I couldn't find anything on these cleaned-up bullets having any effect on accuracy. Seems most folks say the moly isn't completely removed. Would this cause any problems in the barrel? Heck, I've never even held a moly-coated bullet so I know nothing about them. Thanks.
 
I have a factory rem 700 that never shot great. The best groups I ever got with that rifle was with moly bullets. A lot of barrel manufactures frown on moly, but the science behind it is interesting. I don't buy them anymore, but I'm not scared of them at all. Maybe just clean the barrel on a tighter schedule and let them fly.

HW
 
I did the moly thing in the 90's. Sierra had some of the best applied moly. Corn Cob alone probably not going to remove much after hours and hours of cleaning. Home molly not waxed and imbedded with steel comes off pretty easy. I would run a small batch with walnut and some BB's to speed up what will be removed. Regardless shoot them or send them my way and I will let you know how I shot them for you. 😂😂😂
 
I used some IPA, the kind that is to de-ice a frozen gas line..not the kind from the liquor store. That removed the lesser adhered material. Then toss them in the tumbler with 60% corn cob, 40% white rice. It seems to do a very good job. The rice I use gives rise to a whole new thread. If interested give me a shout or search on this site. I can't remember where I got the tip on using a rice blend.
 
lyotehunter said:
I have always shot berger moly coated bullets in my 17rem and they shoot awesome. I can shoot more between cleaning without the accuracy falling off.
Click to expand...
Agree, I remember when the moly craze first started, nothing but whining about not getting the black out when clean..but that was the idea, it filled all the little lines and holes..been shooting coated bullets ever since, but now I DANZAC everything myself...
 
I do all my own Molly coating it will greatly extend your barrel life, and I've never had any problems with moisture contrary to what's always said on the Internet.
I use the wet method of application.
IMG_1934.jpeg
 
I impact plated with moly and then wax coated for a few years. I shot a load of groundhogs with moly bullets but they didn't seem to care either way. Eventually, I adopted the same attitude towards moly and just stopped using it. I can't say that I ever had an issue with moly other than the job of coating the bullets.

Now that I use a borescope more often and see all that nasty carbon building up in my bores, I wonder if going back to a bore/barrel coating wouldn't be a good idea again.
 

Similar threads

D
Removing Moly from Bullets with Rice
2
Replies
19
Views
1K
drakehammer
D
M
Moly coated bullets
2 3
Replies
29
Views
9K
Clark
Clark
benchracer
What results with HBN or Moly coated bullets?
2
Replies
19
Views
5K
gohring3006
gohring3006
S
Moly removal from bullets
Replies
7
Views
2K
steelersfan
S
R
moly coated bullets or not?
2
Replies
19
Views
10K
comfisherman
C

Recent Posts

Top