Savage Action Question

CoSniper66 said:
In general, the Savage model 10 was a piece of crap in stock form, and required a lot of work to get it to run good enough to run in competitive shooting matches. I have about 5000 rounds on it now, planning on buying a Masterpiece arms Matrix soon. This rifle is chambered in 6.5 Creed. I have an old stagger feed 223 Savage model 12 and an older model 110 LA in 243 that run good with the internal magazine . I also have a 22- 250 center feed with the Savage 4 round detachable magazines. Those are the worst of all and malfunction at least once in 4 rounds .
I really need to switch it over to an AICS pattern mag.
Click to expand...
I'll have to disagree but you are entitled to your opinion
 
Will.284 said:
I run almost all savage actions and have several in mdt stocks and absolutely no issues with AICS mags. CoSniper66 -if your savage actions are such a pain in the butt I'll buy them
Click to expand...
I have them all running now except for the 22-250. AICS pattern mags are the best, Just not the plastic ones.
Tuning a Savage action can be difficult. A friend of mine has an Axis in 223 with the 4 or 5 rnd factory detachable mags that malfunctions regularly. He also has a Savage model 10 in a MDT chassis that works good with metal AICS pattern mags, but not 100% Different length mag releases are available to tune mag height.Metal feed lips can be tuned, you can't do much with plastic. Also , you will need to upgrade the extractor and ejector on many of them.
 
CoSniper66 said:
In general, the Savage model 10 was a piece of crap in stock form, and required a lot of work to get it to run good enough to run in competitive shooting matches. I have about 5000 rounds on it now, planning on buying a Masterpiece arms Matrix soon. This rifle is chambered in 6.5 Creed. I have an old stagger feed 223 Savage model 12 and an older model 110 LA in 243 that run good with the internal magazine . I also have a 22- 250 center feed with the Savage 4 round detachable magazines. Those are the worst of all and malfunction at least once in 4 rounds .
I really need to switch it over to an AICS pattern mag.
Click to expand...
I have a Savage 10 (DBM) and 12 (internal mag) in .300 WSM. If I do my part, I do not compete, but my current load is .5-.75 MOA to 966Y with 215 Berger. Other than a muzzle brake install and bedding the stock and 20 MOA rail, it is pretty factory stock. My only complaint is that the factory magazine that came with it only holds 2 rounds. It will be with a different stock and 5-round AICS mag when it is time to re-barrel.
 
cgailey said:
I have a Savage SA with 4.2 action screw spacing and top/side bolt release. These came with the Stagger feed internal magazines. If I put this action in a xlr or mdt chassis that allows for 4.2 or 4.4 action screw spacing, should I be able to use the AICS mags without any feeding issues? Are there other dbm stock options for the 4.2 spacing savages? Thanks in advance.
Click to expand...
Hi just a quick question, did you remove the internal magazine attached to the action?
 
Man my memory is fading but I think the only issue i ever had was the long action stagger. I had to mill the action, mainly the front to allow proper feed. I've run a pile of la action savages and they always did great. Wound up with a truing reamer from ptg and bolt face cutters, plus a host of other things making the savages smooth. IMG_8129.jpegIMG_8128.jpegIMG_8049.jpeg
IMG_8117.jpeg
 

Similar threads

J
Savage edge/axis action question
Replies
2
Views
5K
jmason
J
L
Savage action questions
2
Replies
16
Views
7K
geargrinder
G
A
Savage 112 barrel question (action length?)
2
Replies
15
Views
6K
redstater
R
S
Savage Intermediate action questions
2
Replies
20
Views
4K
Sevy
S
R
Switch barrel rifle question, long action .223 Savage?
Replies
1
Views
4K
Gene
G

Recent Posts

Top