levers4life
Well-Known Member
Llama MiniMax .45. I forgot to get before pics but it was pretty rough....
Cool looking cerekote jobs
- Thread starter AverageJoe90
- Start date
Help Support Long Range Hunting Forum
I would love to have a fluted barrel two colors like that
Bullwhacker
Well-Known Member
My Springfield XDM10 4.5 OSP
Very nice
Bullwhacker
Well-Known Member
Another with contrasting.
Nice I like the green
Kmccord
Well-Known Member
For those that are running two colors on barrels, how long and what temp are you running after the first coat, before you tape it off and run the second color on the barrel?
Shooter264
Well-Known Member
For me it's two complete cycles. Spray the bbl, cure it, tape the bbl and cut out the flutes, blast the flutes, then spray and cure second color
Kmccord
Well-Known Member
Ah, so you sand blast twice. I was thinking it would be sandblast everything then tape the flutes off, spray, cure for a specific time, then remove tape, tape barrel and spray flutes then full cure. I have a test barrel I am going to try your way.
Shooter264
Well-Known Member
Your thinking may work fine as well, I hadn't thought of doing it that way but I'd think you'd want to hit the flutes with acetone after removing the tape to removed any adhesive left behind and if your non fluted section of the bbl isn't fully cured, you may run into issues w the acetone
Nevrsummr
Well-Known Member
Would you mind telling me about the barrel on the blue chassis gun? I like the contour and fluting.
