How about I would like the 90 piece, and
Run gun 100 plus the dies. Thanks David
Run gun 100 plus the dies. Thanks David
I am looking for 338 win mag brass!!! Thanks
- Thread starter braind74
- Start date
Help Support Long Range Hunting Forum
That works for me!
You okay with that 308223. How much for 90 pieces. Plus shipping
alancthomas
Active Member
Modway $90 for 50ea new and Im making some right now out of 300 win man and 7mm mag brass , lots of trimming with the 300 win mag and the 7mm mag comes up 10 to 12 thousands short
Mike Matteson
Well-Known Member
I haven't done it yet, but looing at expanding 300Win Mag to 338 WM cases. I have the straight tubes Peterson brass, but haven't taken the time to resize the brass down to 338WM cases.
The OP was last seen almost two years ago. Hopefully, his brass shortage has been resolved by now.
alancthomas
Active Member
Im using 300 WM and 7mm mag brass to make 338 WM and the 7mm is way less labor but comes up 10 to 12 thousands short . just bought from midway USA 338WM new 50ea for $108.70 thats $2.17 each . Got lots of $ but also Lots of time so away I go down the rabbit whole
Frank in the Laurels
Well-Known Member
- Joined
- Jul 15, 2007
- Messages
- 1,998
..don't worry she'll stretch after a firing.
alancthomas
Active Member
Kinda hoping for the stretch...... with the 7mm mag brass formed to 338 WM as its a one and done process and the 300WM is a 4 step process and then anneal on to of that ......... Made a bunch of 350 Remington mag brass out of 7mm Mag brass , Had to buy a redding form / trim die but the came out Awesome . I cant keep up with orders for that cartridge even when I priced them at $150 per 20 . I would have thought that would have threw everyone off buy but Heck no ...... Now if I could find more 7mm mag brass Id be sitting way FAT
I sold my 338 brass 2 years ago and i do not have any more
Graf's has Norma .338 Win Mag brass in stock
www.grafs.com
NORMA BRASS 338 WINCHESTER MAG UNPRIMED 50/bx - Graf & Sons
This is not loaded ammunition.
www.grafs.com
alancthomas
Active Member
Got 50ea from Midway USA and 50 ea from Graf & sons today and Im making some out of 7mm mag & 300 WM brass tooGraf's has Norma .338 Win Mag brass in stock
NORMA BRASS 338 WINCHESTER MAG UNPRIMED 50/bx - Graf & Sons
This is not loaded ammunition.
Mike Matteson
Well-Known Member
I am not short on brass, but it's win, Rem, Fed or other. Stepping up better brass. Peterson or Lapua.
