"Secret" barrel length

cohunt · Sep 1, 2024

So has anyone had an exceptionally accurate rifle and then chopped the barrel down to 21 3/4" to see what happened to the accuracy?

The Houston warehouse secrets say you "must" use 21 3/4" barrel for optimal accuracy.......is this really the "secret length"?

I've seen some pretty darn accurate rifles that weren't 21.75"--- could they print better groups?

I bought a26" 300wsm to cut down and thread for suppressed hunting--- I was originally gonna go for 22" but why not 1/4" less just to try----- but it's pretty accurate at 26" and I hate to ruin a good thing ( never should have shot it before I chopped it cause now I'm doubting if I should go for it)

Thoughts on the "secret barrel length" from those who have tried it .....?

The Oregonian · Sep 1, 2024

I'd feel better about getting good accuracy with a shorter barrel if it shot well as a longer barrel. Don't let that bother you and go for it if it is for a suppressed shorter barrel.

P7M13 · Sep 1, 2024

You and I read the article, so there's nothing secret about it.
Profile also has a say in that, and the bullet design, seat position plus powder load have the greatest effects.
I have a load of 125 PSPs for my daughter's 26" Savage 308 with a varmint profile, and it's close to a one hole shooter, with the OD of five shots fitting under a dime.

stazmania · Sep 1, 2024

Following

HARPERC · Sep 1, 2024

I think its going to be dependent on the other variables as well. Cartridge, taper, etc.

cohunt · Sep 1, 2024

They produced some pretty astonishing results in that warehouse (5 shot groups of .025" @ 100y) --- but they were using small caliber (22) cartridges too

Virgil said the most important thing he learned there was that specific length was the key to it all

cohunt · Sep 1, 2024

Has anyone here on lrh ever owned a rifle with a 21.75" barrel?

Could you add a brake? That might screw up the "secret" harmonics length, right? ...if a brake added 1.5" would you need a 20.25" barrel? Or does the unrifled length of a brake change the harmonics?

just_jon · Sep 1, 2024

I recently had a 24" 300WM cut down to 22" to remove porting and thread for a suppressor. Aside from being 75 fps slower, rifle still shoots 5/8 moa.

Jon Bischof · Sep 1, 2024

My 22" Sauer 100/Mauser M18 rifles shoot quarter MOA, but I don't think it is due to the barrel length.

Rick Richard · Sep 1, 2024

My limited experience is shortening a barrel length typically only affects the speed and not the accurracy. A big IF is if it does it will be very minimal and may require tweaking the load recipe.

Jon Bischof · Sep 1, 2024

Sometimes a shorter barrel shoots better just because it changes the harmonics.

FURMAN · Sep 1, 2024

Those guys were short range benchrest guys and almost none of that carries over to long range. One of the most notable differences is in long range you have to balance ultimate accuracy with ballistics.

cohunt · Sep 1, 2024

FURMAN said:
Those guys were short range benchrest guys and almost none of that carries over to long range. One of the most notable differences is in long range you have to balance ultimate accuracy with ballistics.

So you are saying that .025" 5 shot group at 100 yards goes to shiznet at 800+ yards? Didn't litz prove that a small group size at 100 equates to a small group size at distance ? Or al least no one ever disproved him any way

Coyote Shadow Tracker · Sep 1, 2024

33.922365498" Barrel length!--1:9-- .338LMAILS - 300gr OMT Berger

"Secret" barrel length

cohunt

Well-Known Member

The Oregonian

Well-Known Member

P7M13

Well-Known Member

stazmania

Well-Known Member

HARPERC

Well-Known Member

cohunt

Well-Known Member

cohunt

Well-Known Member

just_jon

Well-Known Member

Jon Bischof

Well-Known Member

Rick Richard

Well-Known Member

Jon Bischof

Well-Known Member

FURMAN

Well-Known Member

cohunt

Well-Known Member

Coyote Shadow Tracker

Well-Known Member

Similar threads

Recent Posts