Looking at mounting a scope on a new browning x-bolt 300 win mag. Thinking about getting the vortex viper 4x16x50. Any recommendations on scope rings?
Opinions on scope rings for x-bolt
- Thread starter Dstrouf21
- Start date
Help Support Long Range Hunting Forum
Browning X-Bolt Scope Mounts
Made in America, these Browning X-Bolt Scope Mounts made by Talley Manufacturing offer a unique and simplified one-piece scope ring and base
www.talleymanufacturing.com
M1A1ABRAMS
Well-Known Member
Look in the classifieds on here. Someone had a bunch of different makes of rings for a good deal. And he did list Abolt
For Sale - Rings/Bases Clean Out (Leupold, Ruger, Browning, Etc)
Leupold - High Remington 700 1" tube rings & bases (2 sets), Remington LA 30mm tube rings & bases, Browning A-Bolt bases, Savage 110 30mm rings & bases, Mark 4 Browning A-Bolt LA-20 MOA base. Note: All of these are individually packaged & labeled. Various - Ruger, Burris, Weaver, Knight, etc...
Last edited:
johngibbs222
Well-Known Member
- Joined
- Jun 15, 2012
- Messages
- 210
Another Talley fan here, I have a set on my BLR, dog's danglies.
CoyoteConquest
Active Member
I have the Brownings on mine. I'm pretty sure they are made by Talley
Do you have a budget in mind? I do not want to assume anything, but since it is a .300 WM (which remains my go-to chambering), you will use it as LRH/S. If so, IIWY, I'd put and bed a 20 MOA rail, and your choices for rings increase by X-fold. If this is within your budget, I like this ...
Good luck!
Last edited:
William W.
Well-Known Member
- Joined
- Dec 30, 2014
- Messages
- 106
Badger Ordnance Max 50 steel rings or the Burris Xtreme rings in aluminum. Both are 6-screws/ring. As with others, I use Talley rails - usually with the 20-degree slope.
Last edited:
tsyarnall
Member
I have the Browning X-Bolt Speed with Talley rings and couldn't be happier. Don't skimp on your scope rings….
Unit3
New Member
+1 on the Talley rings. Always felt 1 piece rings offered a simpler and more secure mount system. One less connection point for looseness or alignment issues. Only downside I have seen is less adjustability than traditional rings on a rail.
Lenny Foffa
Well-Known Member
- Joined
- Mar 6, 2017
- Messages
- 1,673
Hi , Talley products are great, Burins is very good too!! I am a fan of Leupold Steel Rings and Bases for mounting a scope on a HUNTIUNG RIFLE! A Rifle that may see rough duty and be used in inclement weather. Maybe very cold Temps, maybe frozen rain, perhaps Ice on the rifle. I have used Leupold Dual Dove Tail Rings and Bases, and also the Leupold Mark series bases also steel, with the cross slots. For a hunting rig, I prefer RIDGID Fixation with very little chance of any movement, even after numerous shots from a magnum. Yes!! Its old school, thinking, not very Tactical looking, just strong and simple, but my preference. Good luck buddy!!
Attachments
Buttermilk
Well-Known Member
I initially mounted a scope on my Browning X-Bolt HCLRMcM using a picatinny rail offered by Browning and some Browning rings. Both of which are made by Talley. I needed the scope mounted lower than what that setup was allowing, even though I used low rings.
I switched to the one piece Browning rings made by Talley and by eliminating the picatinny base, I was able to set the scope down lower using the one piece rings. Scope height wound up being perfect for my application.
My scope I chose is a 4x-20x-52 Leupold VX5HD, which for me is a good choice. I've shot this rig out to 1,100 yards successfully on steel targets.
Only photo I currently have showing the scope and mount setup.
I switched to the one piece Browning rings made by Talley and by eliminating the picatinny base, I was able to set the scope down lower using the one piece rings. Scope height wound up being perfect for my application.
My scope I chose is a 4x-20x-52 Leupold VX5HD, which for me is a good choice. I've shot this rig out to 1,100 yards successfully on steel targets.
Only photo I currently have showing the scope and mount setup.
Attachments
I have these on multiple X Bolts and other guns . One piece cnc makes them easy to install and they've never caused any issues, even when crawling on the ground they stay true. My experience.
dnzproducts.com
Browning A Bolt Scope Mounts And Rings | Game Reaper Browning A Bolt
Browning A Bolt Scope Mounts & Rings - DNZ Products Game Reaper one-piece Browning scope mount is lightweight, durable, and extremely accurate. Place your order right now!
dnzproducts.com
