VX6 Illuminated Level

Dinosaur hunter said:

If I remember right you hold down the light button for about 10 seconds to turn it on or off.

Click to expand...

Leveling the riflescope (All VX-6HD scopes are equipped with an Electronic Reticle Level)

1. Begin by leveling the rifle in a vice or steady rest.
2. To activate the Electronic Reticle Level, press and hold the illumination button for fifteen seconds. The reticle will blink once at 5 seconds and again at 10 seconds. After 15 seconds, the reticle will flash twice indicating the Electronic Level is ON. Release the button and press it again to turn ON the illumination. If you repeat the steps above, the reticle will flash 3 times indicating the Electronic Reticle Level is OFF.

Tiny Tim said:

Maybe a stupid question, but how do you, or are you able to turn off the level function on the illuminated reticle of a Leupold VX 6.

I only use illumation during first and last half hour of light, but on the occasions that I'm in a tree stand, the blinking reticle drives me nuts. (Apparently I'm unable to constantly hold the rifle level )

Click to expand...

Seabeeken said:

I seem to recall tilting it 30 degrees also turns it off. Read it somewhere. I've not used mine in my mark 4hd yet

Click to expand...