Help Support Long Range Hunting Forum
I'm pretty sure I once told you it couldn't be done. Not and maintain our standards for terminal performance. I have been pretty adamant about not ever having a tip in a Hammer Bullet. There is some crow eating in my near future.
At this point everything that we have designed will be very much the same load compared to the similar weight Hammer Hunter. You could drop a couple grains from the current load and work up again and likely end up in the same place.
This initial line we designed to fit factory mags and saami oal lengths. We will continue to design bullets that are longer for their weight with more aggressive form. Also, without having shot them over the bc system, I want to be conservative so the peanut gallery can't find something to call me out on. We have shot several diff ones over the Oehler 89 and I used that form factor to estimate the bc on them. They should be very close.
If you have the twist, that one should be fun!
Has a 1:7.5 proof with a 26in barrel. I also have some 121 HH's that I am going to try. I have RL16 and H4350. Which powder would be good with the 121's and 127's?
Rl 16 and H4350 are very similar burn rates but RL16 gives a bit more velocity.
