88acres
Well-Known Member
Does anyone have any published or unpublished load data from Berger for 6.5 PRC 140 gr Elite Hunters? I have it for the 156 EOL's .
Happy Thanksgiving!
Happy Thanksgiving!
Appreciate the info! Thank you Z
What brass is this for, Hornady, Lapua, or ADG?
Some of these really make my head hurt trying to figure that out. hahaI run my saum at 62.7gr N570. I don't know how in the hell you'd get 67gr in a PRC case and still have room for a bullet.
ADGWhat brass is this for, Hornady, Lapua, or ADG?
Berger uses Lapua Brass for testing. Im using ADGWhat brass is this for, Hornady, Lapua, or ADG?
Awesome! Thanks for the data much appreciatedYour question got me wondering about trying them so I worked up a load using ADG brass, F210M primers, 140 Elite's, and N560 at 58.3 grains. Velocity ended up being 3,105 average ES was 9. There were two velocity nodes. One at 3,030 and one just over the 3,100 mark. Went with the higher cause of the low es. Shot a .25" group at 300 yards with the powder node I picked when I was doing powder charge work. Couldn't believe it so I shot 5 shot groups at 100 yards. First 3 went into one hole measuring .334 outside to outside. Next 2 shots of 5 made the group outside to outside 0.448". Confimed the drop at 500 yards. dialed 6.0 moa and hit the mark 3 times making a 1.280" group. Not to dang shabby. I think I will stick with these in this 6.5 PRC.
That data doesn't really mean a hill of beans for you or your rifle. All it means is that it worked in his rifle.Awesome! Thanks for the data much appreciated