VinceMule's latest activity

Before Ruger started making their own barrels, it was not uncommon to get one that wouldn't hold 3 inches at 100yrds. When I had the...

That’s sweet! Great accuracy… Christian, the guy I got this rig from said he used Norma 338-06 head stamped brass but he hit pressure...

Old speer manuals and some old IMR data manuals have recduced loads.

Ruger will re barrel a rifle of theirs as long as it it still in production. So, a simple call will verify on your 77 Tang safety. I...

Op's barrel is typical of many of those rifles, I owned a flock of them, and the Ruger #1's were some of the worst of that time. Ruger...

SOLD!

While not the biggest body buck I have ever taken this one has the biggest rack. On last Friday of ND rifle season I was at our cabin to...

Got a critter today with my 7mmstw. 140gr. Nosler ab (or bt- had both in my pocket- don't know which was in the rifle) and 82 gr. rl25...

I loaded for a 18” 30-06 running Speer 165g HotCor SP. I was running RL19, RL22, H4350 & H4831. When Alliant powders were scarce. The...

If war in Europe is stopped, the market will be flooded in a year.

Powder types have a LOT to do with barrel life, check the Heat Index chart to see how hot your particular powder burns. 8208 and R#15...

you certainly have to adjust your seating depth with these two bullets with very different ogive lengths....pending Mag length.

Berger is easier to dial in on tune, but I find the ABLR likes touching to .010” off with the occasional cal/weight liking between...

Seat a bullet so that the body of the bullet just goes past the neck/shoulder junction. Measure the neck at the mouth of the case, the...

You figured out your problem!