VinceMule's latest activity

I was using Reeding comp. shell holders. Web dia. on Norma and Peterson fired was .4705 and FC was .470, sized Norma .4685, Peterson...

I shoot the 6.5 cal 129 and 142, both have to be sorted by ogive length, just like nosler, hornady, and sierra. In the 7mm, I shoot the...

if the problem occurs after he expands the necks that would be thick neck brass not the .200 line. load a bullet in the R-P, Peterson...

So did I! Like them so well I had a 3 dozen satin Ni plated on a job.

The 120 Ballistic tip at 3k is a beast.

1800 to put a new barrel on a Win? Keep shopping, barrel blank runs $400 and change.

Valid point, Can1010. When the necks are too thick, usually the bolt will not close at all or will be rubbing with the chamber acting...

Back to a factory sporter barrel contour likely does have enough material to cut off the tennon for a fresh chamber that is properly...

European brass(CIP Specifications) often has a larger web dia than American brass made to SAAMI specifications, and this is the root of...

If you could cut the threads off the barrel, then bore concentric in relation to the bore, then chamber, you have a fighting chance...

To check for certain, mark the top of your bullet with a sharpie all the way around the ogive, chamber and see if there are rifling...

ARlifeforme, had multiple Hart barrels chambered at the same time with the same reamer in 243 AI, 223, 243 Win, and 22/250 AI. Loads...

Holding a reamer, and having all barrels cut with this same reamer, will ensure that your chamber matches across multiple barrels. I...

Op, is the barrel new?

My first years hunting out West was with a 6 Rem loaded with 95g Partitions at 3150, and big Nebraska corn fed white tails died quick...