-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
timo308's latest activity
-
TTo measure each kernel of powder before loading. If they aren't all the same thickness and length.....bad things will happen!
-
Ttimo308 reacted to Lee Deming's post in the thread The best die lock rings that will never ever come loose? with
Like.
All of my die sets were Lyman until I bottomed one out with the wrong shell holder. Couldn't get another Lyman at the time for my .375... -
Ttimo308 reacted to cape cove's post in the thread The best die lock rings that will never ever come loose? with Like.
Hornady make a good lock ring. It will stay put if secured properly...
-
Ttimo308 reacted to PopNFresh's post in the thread The best die lock rings that will never ever come loose? with Like.
those Forster cross bolt rings work well for me but they're a little bulky and you have to make sure you can get to them on a fully...
-
Ttimo308 reacted to Songdoger's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
This☝️☝️. Ran into same issue with 6-284 fireforms. Seat the cheapest standard bullet you can get deep into the lands and give them a...
-
Ttimo308 reacted to mudflap621's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
This is where I would start looking. Strip FP and ejector from your bolt and see if it drops free on virgin brass. If so jamming and/or...
-
Ttimo308 reacted to Tiny Tim's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
Might just be the picture, but the primer strikes shown appear inconsistent. Agree with others, try them from the same sleeve in fire...
-
Ttimo308 reacted to EFouraker's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
With the improved cases, You need either a crush fit with the brass in the chamber, and/or jam the bullets to get consistent ignition...
-
Ttimo308 reacted to Tom Sermersheim's post in the thread Issues with White River Energetics Large Rifle Magnum Primers with Like.
I had a similar situation with some primers requiring a double strike to fire the cartridge while fire forming some 250 AI in a TC...
-
TPRO-BED 2000, from High Score Gunsmithing, Albuquerque,NM It's the. best bedding product I've every used.
-
Thttps://www.probed2000.com/
-
Ttimo308 reacted to Wilderness Blacktail's post in the thread Rechamber 6.5 Creedmore to .260 AI with Like.
Not .005, its much smaller .0005"
-
Tyour .200 line dia. isn't your problem the shoulder dia. is. creed .463, 260ai .460 you will have to remove a good portion of the...
-
TI doubt that it will work without setting the barrel back. You are comparing the body diameter at the base and that makes it appear to...