Roughrice's latest activity

May even try a flat based bullet like a Pro Hunter/Partition. May seal it up good an provide you something. At the ranges a shorty 308...

Came from a gunsmith who claimed the customer hardly shot it and wanted to switch calibers. But, although we tend to trust a gunsmith...

Well, I get run out too. I’ve used RCBS and Redding dies and have found the later to be better in this regard. I’ll have loads run out...

Forster Dies, have given Me the Least "Run Out" and BEST Accuracy as they Position, the Expander Ball, Near the Top of Case !. And you...

I'd check your cases after resizing them. If you use an expander ball improperly adjusted/ centered can cause case/ neck runout. As far...

I'll say it......bullet runout is like no. 5 on my list to affect accuracy. I stopped looking at it years ago after I developed my...

Using a mandrel helps and I attempt to use same steady stroke of seating on all rounds.

Watching… I’ve had the same experience. Used Redding competition die without expander ball and mandrel…AND Redding FL bushing die with...

I agree. I picked up a Weatherby 270 at a pawn shop that shot horrible and went to sub-moa after a good JB & Kroil scrub. Besides that...

I didn't see what your twist rate is,I have a 14" .308 Encore that will shoot 165 Nosler BT under MOA to 600 yards. At that point I run...

I think the largest problem most people think when it comes to guns. Is chasing accuracy. If it's a shooter, it's a shooter. Reloading...

If it doesn't work out, I have this Carbon Six 20" that was set up for a Rem 700. I would sell you...posting for a friend ;)

It is truly disappointing what is going on with "Industry" in general in America these days. These outfits charge a Fortune for products...

Maybe JBTHEHELL out of the bore and see if it cleans it up??? Worth a shot Maybe even try some of the Absulute Hammer type bullets...

I had the same problem with my 308's. If a rifle don't shoot, find it a new home. I went through two Sig cross in 308 and now I have...