MOA or bust's latest activity

Down here, we’d call that one an eleven point! 😁

Just curious kimber7man, how do you measure the CBTO on a cartridge?

Is this a pre-fit barrel with the chamber cut at the manufacturer?

I wish the OP would elaborate on his problem a little more, perhaps we all can learn something.

It was threaded today at 1/2-28 and I ordered an adapter. Also had a custom machined brake made. I will post pics tomorrow. Thanks...

The simple answer is yes, your gunsmith can thread your muzzle for brake/suppressor. If your barrel is not thick enough for 5/8X24, you...

You are correct about the 400 yard accuracy. I think as reloaders get older and more experienced they try to make the perfect load for...

Brass shrinkage is a quantitative term. Full length size that brass. Bump the shoulder back.002 and go shooting That brass has a belly...

If it were me I would just switch barrels. Take it to a competent gun smith, have them true everything up on the action and bed in the...

By the way, the OP is Bominicious. Take a moment to look up bominicious/cedric the entertainer. Hilarious!

Could you be running into bulging at the cartridge belt, have you measured your brass diameter at this end? Issue appeared for me also...

G5 Montec As I’ve gotten older I’ve had to turn my bow down to 55# draw weight. I used the G5 fixed blade and had a pass through on...

My go to Broadhead on elk is the G5 Montec. One piece machine, stainless steel flies well went tuned and penetrates well. At this late...

These are what I use on my rifles and have had no problems. Have several and just leave them on the rifles and screw on my suppressor...

FWIW, I sacrificed/analysed another 28 Nos ADG case and got the same code as before, 150. So all the cases were annealed as per AMP...