MOA or bust's latest activity

Dropped a rifle off my shoulder on two separate elk hunts. Both times were Leupold scopes with the old twist on Leupold mounts. The...

Definite ejector mark on the factory round and probably one around the “n” on Peterson brass means excess pressure.

I would tell the friend he needs to buy 5-10 boxes of that factory ammo.

I literally get alerts everyday for Large Rifle Magnum primers (CCI 250’s, Fed 215’s, REM 9 1/2). You have to be quick, but you can...

MagnumManiac, What’s the cause of the horizontal lines on the lands and grooves in your pictures?

I didn’t turn necks. Appreciate all input. I suspect Steve is right about too much neck “tension” and soft brass. That fits with what I...

Novice Question: What is the difference in using the expander ball in a sizing die versus using an expanding mandrel (other than size)?

When it does what I want about 3 times in a row over several days I call it statistically DONE.

Ask IHFarmer07, he used to run those before BD2’s came out.

When my son was 10 I got him a Rem Model Seven in 7-08. That boy shot lots of deer with that rifle. When he moved on to a full sized...

It is conceivable that t used the wrong code when annealed some 28N brass last time but even that seems an unlikely cause. When I do...

So, I think I have identified the problem causing “loose” HHT bullets in loaded 28N cases, and Koda_ and Rick Richard were all over it...

I will make sure the case neck ID’s are clean when I try loading some more cases. I did use HBN treatment on the bullets (as usual) so...

Thanks Rick, good idea. Will shoot some this weekend and see what happens.

Thanks crashlanding for your recommendation. I may end up buying some new brass, but gonna see what a few others think first.