highdrum's latest activity

I killed or was witness to 15 deer/antelope killed this year with my 6cm, 22cm, the womans 6cm, and my buddies 6arc. Distances were 180...

Idk where you got this, but my lapua 6cm necked down and turned for 22cm holds 51.4gr water weight. Hornady brass is about a grain more.

Use a light palma, turn shank down to 1.200, take a half inch off even. Carbon is cool to look at, that's bout it.

My 300nmi is 22in suppressed, I'm pushing 215s at 2960-2980. I'm not pushing this hard at all. 86gr H1000 or N565 both shoot near same...

Trying to run the 3100 node from a 100gr capacity case with 215s is a bad idea. Go. 225 freebore. And run the lower 3000 node. You're...

Killed a bunch of deer and a handful of elk with 185vld/300wsm combo at 3030mv. Usually they didn't take a step if you put it into the...

Igniter, Vesper, falkor Lw7, all will take bainey. Believe the newer bumblebee will as well, I know the bottom mag loading port is very...

100%, dbm can fit a multitude of magazines that can run from 6.5cm to 338 lapua.

I've read by guys who've tested the RR brakes, you get the best muzzle rise control by orientating the brake ports at 12 and 6, VS 3 and...

Zermatt told me 20-30 inch pounds over the phone several years ago, I go 30 on my fixit stocks, plus just a lil more by hand. I usually...

Clean screws and screw holes with a degrease or alcohol, something to cut the oil. Apply a thread locker. I've been shooting origins for...

Tiffany blue almost, not for me.......they had to pick a color not offered by other companies though. I buy tipped bullets, but I will...

ADG makes 7LRM now through gunwerks. I think a 7/300prc is around 93-94gr powder. 10-11 gr less than 28N. If I was after a fast 7mm, 28N...

Lop is adjustable with spacers, you can get a negative cheek by manipulating the alignment to bore of cheek piece. If you install the...

We don't have the sample size that Form on Rokslide has every year, but 2950 fps with the DTACS from the suppressed 16.5" 6SAUM, and I...