Dmagna

If you want a 6.5 rpm just buy a prefit for it. You can get 6.5x284 brass still.

The all work

The brass has been pretty crappy. Still been years since Peterson had some. But I did make the switch and used some 7 rem mag from ADG...

I didn’t want to mess with it anymore. Defiance looked it over cleaned it up, didn’t change anything really. That action just doesn’t...

Sounds like the best option, I will probably buy a cheap die and cut it.

The problem is the 240 shares no other cartridges. Nothing would touch the case, i can’t get close enough to the belt without crushing...

Wrong forum bud.

I am getting clickers and need to resize closer to the belt. There is no collet die for this cartridge being that it is the only...

Is it a new barrel?

I was getting 3650 with the Barnes 101 lrx, I would highly doubt weatherby is using rl26.

Is there a way to make one using a 06 based cartridge? I am getting clickers and the brass is expensive. Or is it possible to take a 240...

Well depends on what brass you want to use. Lapua 30-06 brass is in stock places, if you are going to turn necks and go through the...

I have been using rl26 in mine. 3300 fps with alpha brass and a cci450

Freebore is not jump, depending on the weight of the mono you plan to shoot you could use the freebore up pretty easy. Monos are longer...

You get what you pay for in this game. “Top Brass” is good for plinking but that’s about it. Any bulk package brass will have dents and...