Recent content by bigrich954rr

GET AR500 it stopped my 270AM at 150 yard with just a small nick in the plate

ok thanks guys i looked around a little and it seem like it really that easy just drill and glue in i ordered them up and will be installing them this weekend with marinetex. I might put a screw thought the hole in the center too. you guys think this is needed ?

I seen a few posts where you just drill a hole and jb weld them in is it really that easy ? wont they pull out with any load ?

Ive been running a load of Reloader 22 at i think 69.7 grains (dont have my book in front of me)behind a 180 grain accubond. was worked up on a 80 degree day at around 800ft alt . 3050fps out of a 24 inch barrel Well ill be moving across the country for a year so can i just load a bunch...

Hey guys its been a while the USMC be keeping me busy, but im lookin to take my 270 AM out hunting this year. Can you still buy wildcat bullets ? I was using the 169.5 ones but my supply is getting a little low , is there anything better out now ? or can i get the 169.5 again ?

ive been out of the game for a while but the owner who is the nicest guy to deal with. ive spent hours on the phone talking to him years ago. Got very sick and i think his wife took over or is working on running it

What a shame a few years back they were one of the best. With this said buy Surgeon Actions

Dont buy Nosler 300 to use in 270AM i did had alot of issues went out got remingon bass all sized fine.

I was shooting my ruger 10/22 fully custom at 250-275 yards hitting soda cans about 8 out of 10 times with cci green tag ammo. Was really shocked how good the cci was any other good brands to try for long range rimfire shooting. looking to order a case. How far you think i could push this...

Yes 50cal AP

Just had the same thing happen. But i just load some up like normal all shot the same but havnt tried all the diff ones yet only a few loads i did this time so think they good.

If looking for a gunsmith all on this board are good to go Ive worked with kirby for a while now good guy. Im getting a 270AM in a few days from him and taking it to a match so i have faith in his guns. I also have a good amount of rifles from GAP rifles. great rifles but its hard to talk...

Just worked up a load of RL22 at 69 grains with a 180 accubond at 3068 to 3075 fps 7th off the lands. Might be a little hot no pressure signs but one of the bolt lifts was a little sticky out of 75 shots might be a off case but work up to this load. reloading case tonight so ill let u know...

just looking for more info

check midwayusa one B-Square Bubble Bore Level Weaver