-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
ARlife4me's latest activity
-
Can you use Nosler’s name? I thought it would trademarked Thanks Buck -
following
-
Following - designing a wildcat has always been an interest! love the details provided and work. wish i could help.
-
Maybe reach out to Ray Gross at Manson Reamers for some help and then you've got a in with a reamer maker! He's helping me now with a 25...
-
Following
-
Once you finish let me know how to get a reamer and brass. I have been saying since the 7mm PRC came out that it should have looked...
-
I do my best to strive for 100% (+) case fill and 100% burn inside the barrel.
-
ARlife4me replied to the thread Case fill and burn %.the slower the powder and shorter the barrel= less burn/burn completion. for the slowest powders you need a longer barrel and/or...
-
90% plus on fill. Burn rate to match bullet+cartridge parameters. Book will guide powders. COAL is also a big deal unless you go by...
-
I was always taught 90% case fill. I see my best results with 90% or more.
-
My preference is 90% and up, regardless of cartridge.
-
ARlife4me replied to the thread Designing My Last 7mm Cartridge.just when i thought the "nsm" was Not So Much ;) i've been trying to get a complete rendering in quick design, but no luck so far...
-
ARlife4me reacted to 6.5x300 WBY's post in the thread Decisions - Choosing between 7-08 or 308 with
Like.
7mm 08. Because i love .284. But truth be told they are both great cartridges as i am sure you know. Either can do what the other... -
ARlife4me reacted to James K.'s post in the thread Decisions - Choosing between 7-08 or 308 with Like.
I am partial to the .308 .... seems like i see more 308 on the shelves....I don't reload though.
-
One more thing…. After 50 or so cases the unit has a two stage cooling fan . Leave it run unitil the fan reverts to low speed. Usually...