ARlife4me's latest activity

Pretty sure you always anneal before a resizing operation, not after. I smashed a bunch of lapua 260 rem down to 6.5 creedmoor and even...

Try this again… anneal then resize

Update …. Just checked, anneal first then anneal

I have an atn and an armasight. Big price diffence, but both work. The an is a 20x and the armasight is a 24/28/32x (I'd need to...

Not for converting. Verify this next comment, I recall the instructions suggesting you resize then anneal. On AMP site pdf...

are you annealing to not size brass in a die or for converting?

For me going through the analysis feature of the machine for each batch of brass eliminates the complexity of the setup of the machine...

not much different that the 6.5prc vs 264wm...............pressure is the difference as the prc is roughly 50-60fps slower. i have...

Whenever I get a new brass delivery I analyse a sacrificial case, enter it into my book and proceed with the annealing process on the...

so, knowing your wall thickness is a necessity along with brand (and possibly lot#) is a must?

The pilots are sized to get the neck/shoulder of the case in the right spot for the heat that the inductor will deliver. The shoulder...

following

Yes there are pilots for different calibers

Don't think shoulder angle/neck size has much to do with it. Brass composition and thickness will determine that. Pilot is cartridge...

Was a big BDL fan but I’m slowly warming up to the DBM. In the scenario you described, I would 100% use a DBM. You could get a single...