98s1lightning's latest activity
-
98s1lightning reacted to dan1953's post in the thread .008 Bump Required to Smoothly Chamber Round?? with
Like.
I might be interested in the 6.5 Grendel brass if 7mm 08 doesn’t get it. -
98s1lightning reacted to Dmagna's post in the thread .008 Bump Required to Smoothly Chamber Round?? with Like.
I would assume it’s a case issue. I believe Peterson talked about a bulge issue with the 6 arc brass. But I would also double check your...
-
98s1lightning reacted to Tiny Tim's post in the thread .008 Bump Required to Smoothly Chamber Round?? with Like.
Since you have 1500 rounds on it, has this always been an issue? Did it just start? Did it start after a certain number of firings...
-
98s1lightning reacted to Jamie's post in the thread .008 Bump Required to Smoothly Chamber Round?? with Like.
If everything thing else checks out, then I would check the base of the case, it might not be getting sized until you screw the die down...
-
98s1lightning reacted to Sdvldog1371's post in the thread .008 Bump Required to Smoothly Chamber Round?? with Like.
You should absolutely remove the Primer before measuring, the Primer is not guaranteed to dimple the same exact height every time. I...
-
Spent too much time on this forum while keeping my recliner in place.
-
Hauled my skid steer home Plowed snow and put hay out for the cows. Adjusted the stock on my new Browning x Bolt 2. I think I’m gonna...
-
Walked to the coffee shop. Loaded some 308 win for testing, Loaded some 6.5x55 for pressure checking. Installed a new shower head...
-
Below zero all day. Tended the wood 🪵 stove. Waiting on injector o rings, did some cooking & adjusted some triggers to try to get them...
-
We went to our little cabin in the mountains and dealt with all the new snow that had accumulated. Could have been much worse but our...
-
98s1lightning reacted to central iowa couple's post in the thread .008 Bump Required to Smoothly Chamber Round?? with Like.
I had a similar issue with 3 barrels i had made for some 35 whelen i was building. I finally got a small based die for a 30-06...cut it...
-
Oh my gosh using a circa 1903 Winchester lever gun quarter bore as a serious coyote rifle is the most awesome thing I’ve read on this...
-
Ammo price is basically $50 to $65, right in line with other premium cartridge options. As for reloading that is yet to be determined...
-
Technology is stagnant on cartridges. I applaud them for thinking outside the box. 3000fps from a 20" barrel with a 175 grain bullet...
-
98s1lightning replied to the thread .008 Bump Required to Smoothly Chamber Round??.6mm ARC Sounds suspect in its own to have die probs/risk I never heard of it, but I live under a rock and am a dinosaur by today's...