98s1lightning's latest activity

Sounds to me your die is much larger than your chamber and your brass is getting fatter when you resize Something along the lines of...

I’m guessing it’s the spent primer, I just take my priming tool and push it back in the pocket then measure the spent case prior to...

Don't forget to try this first Great suggestion Knock the primer out WITHOUT bumping shoulder and see how brass chambers

Yes agreed that resize is got to be going somewhere 0.008" is a lot IMO 0.001" or 0.002" should get you back into smooth chamber and...

Try depriming then measure to see if primer is backing out

Concentricity problem or Brass OAL reaching maximum allowance? Maybe a tight chamber being fussy

You're not measuring something right. 0.000 bump should still close with a bit of resistance. No way it should take 0.006. Have you...

If you use the same rifle/load for everything, 365days/year…..it’s reflex! Even “if” you screw-up…..4” on a big game animal is...

I believe you. Those SPEER BTSP bullets are super soft and violent even for a cup and core. I’ve used them in 165 grain for 300 win...

I hate to be the bearer of bad news but I think the .243 and other fast 6mms just might blow an even bigger exit hole than something...

The company that sells the powder has info about using it for reduced loads with jacketed bullets The trick is finding it available to...

I agree you cannot be overgunned on coyotes. I have shot them with a .22LR. Ironically, my first was shot with a .308Win and my last one...

I shot one with a 120 gr Maker's mono in a 280 AI and it rolled him right up. I'd also recommend the 120 gr Nosler, it's my go to deer...

Honestly I think y’all are overthinking this a bit. It’s a 30 pound mangy dog. 🤣 Just shoot it! 🤣🤣🤣

120g V Max with 72-73g of R#22, CCI 250 primers in the 7 RM in Rem brass is very accurate and fast, blows up crows and coyotes. The...