Tiny Tim

Shoot it the same way you'll be shooting it in the field most frequently. It'll recoil differently depending on the rest you're using...

This!

I'm guessing the brass is thick at the neck shoulder junction and when you expand it, the neck shoulder junction gets moved out (like a...

Check neck diameter at the mouth and at the shoulder with mics after sizing and after expanding. You may have a donut at the base of the...

if the problem occurs after he expands the necks that would be thick neck brass not the .200 line. load a bullet in the R-P, Peterson...

Might just be the picture, but the primer strikes shown appear inconsistent. Agree with others, try them from the same sleeve in fire...

I had a similar situation with some primers requiring a double strike to fire the cartridge while fire forming some 250 AI in a TC...

I had 5/8-24 on the 3b with a 7mm and 26" long.

Manners eh-1 and bartlein 3b

I hate to be a party pooper,but for 600 yards at 95% of North American game I would go with a .308 in a Howa 1500. Probably splurge and...

No experience to that extreme, but often times when installing a factory barreled action in a chassis, a similar situation exists. It...

Yes, their darn pricy……but, they're for hunting with not plinking with. Unless you have a Diamond mine in your backyard! 😉 Use...

Brother, they look pretty good. I might have to take a trip to my BX. The spec for model # 46902 Gen II (standard) in .308 Win is 6.2...

Seeing feedback, I am flexible. Let's say as light as possible.

Only way you will know weights for certain is to pull barreled action and weigh it. Leupold and vortex have some relatively inexpensive...