Tiny Tim's latest activity

Tony, I hope all is well with you. I load 6 belted magnums, 3 of which are .300 WMs, I, too, have never had any case separations. I...

During my time with Uncle Sam’s Misguided Children we did cold weather survival in Pickle meadows and above. Supply guys had brand new...

Compression moisture wicking layer, mid/heavy weight wool mid-layer (I use FL Furnace when really cold), down puffy, outer shell...

When I first started reloading my 7RM,I thought I was FL sizing (setting up die per manufacturer), then after a few reloads, my "sized"...

This is why the US Military came up with the A191 chamber and the pressures that go along with it. Normal 300WM brass only expands .010”...

Awesome!👍 Amen! 🤣

This is why Peterson makes "long" brass for belted cartridges.

Read what magnum maniac said. Belted mag cases are notoriously short and will stretch a lot on the first few firings. As stated, fire...

Agreed here... At complete timeline would be helpful... I've had people take up to 5 days to ship but they're usually good about...

Agree with Magnum. Even if all you have is a FL die, don't run it down completely. Let the brass fully form to your chamber until it...

Do not run belted cases into a FL sizing before being fired. Period. If you want to change interference fit in the neck, get a Neck only...

I only have your basic 2 die sets….nothing special! I also use a belted case similar to the 300 WM. With mine I definitely "do not"...

Shoot your virgin brass, neck size for your second firing and then measure with a comparator after that second firing once the brass is...

Not certain of your terrain. But others have given great advice. Lightweight, tight to skin merino base layer, with a mid-weight fleece...

If you are moving at all, or have a windbreak, KUIU for me, to 0°F. Merino base, synthetic mid-layer(light or heavy), down outer jacket...