6.5x300 WBY's latest activity

I had the same thing happen and got a set of Warne Rings and that solved my issue.

Give Ryan Pierce from Piercision Rifles a call and he can fill you in on the process.

I have never tried it. I will have to look it up.

What torque value did you use on the ring caps, Allen? Thanks!

Not yet I am still at work. :)

Bedding

That's exactly how they were installed but I did use a torque wrench.

Put some blue lock tight on the screws, then get you the Allen or torx wrench key, and tighten all the screws down in a criss cross...

I had an issue recently with one of my rifles and the point of impact shift and terrible groups. The rifle originally shot great groups...

Tag for the information. Funny you brought this up as I just grabbed N570 and 300gr bergers to try out in my 338-378 Wby. So this...

I have a 338 Allen Xpress (imp. 338 Lapua). My best load and velocity was with RL 33. Velocity with 300 gr. Berger's was right around...

I am currently running N570 in my 338 reaper and my 33XC. Both run 300 gr burgers. 338 reaper is near max at 99gr and 3050 fps. My...

N570 is my go to for my 338 LM I run 300 Bergers in it. Also found it to work best in my 6.5 PRC with 153.5 Bergers. Both barrels are...

I have a 338lm and I'm waiting to try these powders i have on hand for 265-300grs 570 568 LRT 33 Also going to try 570 in 300wm & 264wm

It's about 5.5 grains by spec. Velocity is 100-200fps but depends on a lot of things. I am trying to compare like to like as much as...