6.5x300 WBY's latest activity
-
I have 2 338 rums how much powder difference is it and velocity between the edge and rum -
Has anyone tried n570 in the big 338 caliber .with bullet weights 260 to 285 .and also what's a good powder for 165 grains in 300wsm
-
It is now in the list for my 338 Edge. Along with A-Tips. It seems a little slow for the 285s. Everyone comments that N570 likes a...
-
Brass needs to be fire formed to your rifle anyway so just run a sizing mandrel through the neck to straighten any dings. If you don’t...
-
New brass with ADG, Lapua and Peterson. I size the necks and chamfer and deburr the necks
-
6.5x300 WBY replied to the thread What process for new brass….I'm pretty simple in my approach for my 3 rifles. My 6.5x300 and my 338-378 get FL sized, chamfer, debur, Prime, powder, bullet...
-
If the rifle is properly headspaced as Ackley intended, there is no need for false shoulders.I have 6-8 ai chambers and never needed a...
-
I used Reloder 26 (54.5gr. that particular group) with a 147 gr. Hornady ELD-M, Lapua brass and Federal 210M primers. I was also...
-
I do the same, just chamfer and debur
-
Nice work. Care to share the bullet and powder details?
-
6.5x300 WBY reacted to Revolting Peasant's post in the thread What process for new brass… with
Like.
^^^this^^ Thank you! I might use a mandrel if there are neck dents. High quality premium brass shouldn’t need a lot of extra work... -
I'm probably going to hear a lot of grief, that's ok but with ADG and Lapua brass, I pull it out the box and start loading. If necks are...
-
I treat new brass just like fired brass. 🤷♂️
-
6.5x300 WBY reacted to Victor3Ranger1's post in the thread Anyone still using a 700 action? with Like.
I sure do 👍
-
6.5x300 WBY reacted to PlumberEd's post in the thread SOLD/EXPIRED Swarovski Z8i 2.3-18x56 BRX-i reticle & ballistic turret flex (BTF) with Like.
Sold