kiwikid

Hi @MagnumManiac I have just seen Norma 264 WM brass available at The Barn in QLD, does that help you?

Get some Burris Signature rings and you won't need a 20moa rail later.🙂

And .... the scope will be perfectly straight regardless of the receiver tolerances, the scope tube won't get bent and the rings will...

So that folks know what this is: https://www.pacifictoolandgauge.com/3-B-Baney-Magazine-Box-310_p_116229.html

Same caliber, same bullet, same speed? Doesn't matter what pushed it at all. 180gr NAB @ 2850 from a .30-06 or a 300SST, or a light...

I didn't think I was going to get out whitetail hunting this year and yesterday was our last day the season. Decided to make a last...

For the past 45 years I have been using a Unique X51 Bis semi auto 22 that was factory threaded. Every time I put the rifle back in the...

There are plenty of examples of cartridges that don't measure up to the one bullet diameter rule. The 223 Rem, 6.5 Grendel, 300 Savage...

Lapua suspended making 6.5-284 Norma Brass but they must have made some recently. Here in New Zealand our importer is showing it in...

Congratulations @Greyfox that is a great looking Buck. Was it another victim of one of your 6.5-284 Norma rifles?

Couldn’t resist this heavy 8pt in Alberta last week…. 152 1/8”. Old guy about 5 years old.

In the age of telephones and customer service, why didn't you just call them directly and ask instead of resorting to the internet for...

After reading your post I pulled out my Fluke meter with the temperature probe and found that one of my Golden Rods (12") is 101° F and...

Another straight pull option is the Heym SR 30 which it appears are available in the USA. My cousin has one in Win 308 and it is a...

A compressed powder load does exert pressure on the bullet. If it is compressed enough it will push the bullet out of the case...