archeratlrg

Greetings, I have a question to those capable and willing to create wildcat cartridges. I havent seen anything based on the 7.5x55...

That 150gr 270 ABLR is a very accurate bullet, you just have to find the proper jump for your rifle.

I'll be doing more testing of different bullets, trying to find some that have a bit tougher base for those kind of shots. Have not...

Nope, you hit a shoulder bone and your lucky to make it to the ribs, let alone into the lungs. Stretch it waayy out there and you might...

You a big boost with the 280 AI over the standard 280, o ly because the 289 is still loaded down. The 279 was loaded full speed to...

It worked like a charm forming brass, then I discovered a 4000+ degree burn temp along with the rest. But R23 netted a tad over 3550...

I don't know that you could exceed the WM but you would be very close behind with less powder and a non-belted case which is a plus. My...

Benchracer....I think what is confusing you is you have two different things going on. When you increase the neck size on a case from...

For those of you smarter than me. If I took a normal long action 06 BDL and mounted a new barrel to run the RPM cartridge would the...

I've been a proponent of this cartridge (the parent) since its introduction. Admittedly, however, I see a pattern. The 6.5 is ALMOST...

He's a real beauty 4x4 My son and I have been chasing a great bull elk and we went in tonight to see if we could get on him which he...

Welcome to the site. When it comes to primers, get what you can find in large rifle. There is no need for large rifle magnum primers for...

Thanks, I knew it was 40 degrees but was it blown out to a wider diameter on the shoulder, say to .492 or .495? Any idea?

I have reloaded the 30 Gibbs. It’s been a while so i’ll tell you what i remember. I used virgin 30-06 Remington brass. I didn’t anneal...

I know this is an older thread, but what is it blown out to on the shoulder?