archeratlrg's latest activity

I have a 35 RPM, A 8mm RPM, building a 30, and I have the 7 and 270 that I'm in the process of stocking.

Bushing dies are being made f Bushing dies are being made for the 7mm RPM so you could pick up a set along with tge appropriate .277...

Are you thinking of sizing the brass down in a 6.5 RPM die every time, then using the mandrel to open the neck? That would be a lot of...

Greetings, I have a question to those capable and willing to create wildcat cartridges. I havent seen anything based on the 7.5x55...

That 150gr 270 ABLR is a very accurate bullet, you just have to find the proper jump for your rifle.

I'll be doing more testing of different bullets, trying to find some that have a bit tougher base for those kind of shots. Have not...

Nope, you hit a shoulder bone and your lucky to make it to the ribs, let alone into the lungs. Stretch it waayy out there and you might...

You a big boost with the 280 AI over the standard 280, o ly because the 289 is still loaded down. The 279 was loaded full speed to...

It worked like a charm forming brass, then I discovered a 4000+ degree burn temp along with the rest. But R23 netted a tad over 3550...