Budget'06

What powder were u using? I'm gonna try Big game with them but I bought a pound of staball match for the 169gr SMKs I plan on using for...

The scope have been removed from the riffle and factory Remington trigger installed make an offer

Would you sell without the optic?

sierra's are usually shorter than berger, nosler and for sure barnes when it comes to same weights. that helps

Depends on velocity but so far things have worked well. I'm expecting the 215s to not work well in the 308 due to that

A 10 has worked fine so far

Those bullets, in every .30-06 I have loaded for, have shot these two very accurately and both are very easy to tune. And they work on...

What's the reason for either of those bullets? Doesn't the 180 have a higher BC?

I've had good luck with the 168tmk in a friend's model 70 308. I find that the jackets are pretty soft and thin and dent easy when...

30-06 is definitely worth the time if you want something to mess around with. I loaded up some 220s and 215s for my 308, I get the rifle...

So far my experiences have been that anything from 190 to 220 is ideal, the shorter the bearing surface the better. The 215gr Bergers...

Update to this although I got no replies, 58.2gr of H4831sc with a cci200 primer yielded an average of 2599fps and **** roughly 1.25"...

Glad I could help.

That's exactly the info I was looking for thank you

I have a howa on a mtd chassis. With the aics magazine I’m able to seat 195 tmk’s at 3.60 oal but I believe the magazine will load out...