Budget'06's latest activity

Both were box stock weatherby Vanguards. Both will shoot .75" with the right handload. The 257 has been rebarreled and will now shoot .5"

Good to hear, I run the 215 Berger in my 30-06 and am forced to single feed. I wanna run 215 Bergers or 230 Bergers in the 300 win mag...

Looking to find people with experience with the Howa HS precision in 300wm. I am curious as to the max COAL that will fit in the...

From Western Powders reloading guide before Hodgdons monopoly

That is from the Lee manual.That manual is a copy paste from bullet and powder manufacters,so it's like getting multiple manuals in one.

Very good point, that helps a lot. Very excited to see how they do. I'll be saving the majority of the 220smks for a 300 win mag project...

I saw the 210 data also. I chose to extrapolate from the 208 because I estimated it would be more similar to the Sierra and was lower...

Looking back now, I did find load data for the 210vld, max being 45.6grs and starting load being 41.3. I would assume starting at 41...

I suspect that to be true with the 220s, the 215 Bergers will be okay, in the 30-06 I didn't touch the lands until 3.52" or so, that...

First I would call Sierra, Berger, and Hodgdon. They sometimes have unpublished data not on their websites that they will share. If...

So I finally picked up a 308, (savage 12 bvss) and I am looking at making a few loads to mess around with since I have a few left over...

Powder burning discrepancies can get frustrating but worse when it is caliber or cartridge applied. Never understood why it can produce...

I've seen that much difference between different magnum primers.

I do all load development over a chronograph. I've found the Nosler manual to be pretty accurate. 165SST with RL22 at 2999fps in the...

I saw a roughly 75fps increase when swapping from a federal 210 to a 9 1/2 magnum. But that wasn't ball powder