baldhunter

I always full length size, has worked for me the last 60 years so I’ll keep doing that. It’s like all the cool kid ideas and I’m glad...

Sure is nice to have medical personal and plenty of folks that has had it done. Catbird keep us updated on the progress. I am a little...

I'll try to make a long story short. My favorite person on the planet was my uncle Larry. He worked for the Texas Parks and Wildlife...

That is from the Lee manual.That manual is a copy paste from bullet and powder manufacters,so it's like getting multiple manuals in one.

I've seen that much difference between different magnum primers.

The ball powders are supposed to work better with a Magnum primer.The only reason I used one was because I load a lot of magnum...

I tried Big Game in my 308 Win with a 26" barrel using 168gr Nosler Ballistic Tips.My load manual didn't show a load for the 168gr,but...

I respectfully disagree, whether you believe it or not, care for it or not, the energy will always be there - you cannot defy the Laws...

The 300 Win Mag can easily achieve over 3000fps with a 180gr bullet.So many powders to work with these days.The 4350 powders work very...

I think your problem is,it's not level.If the spout is tilted down hill just a little,it will dump a tad more powder after it stops...

I have mine sitting upright inside of a 9"x12" card board box.I just use a 2" paint brush to sweep the brass shavings off to the side,so...

Just having a home cooked Thanksgiving meal with my wife.

Everything is about heat, and what your standards are. Standards - Painless is my 308, I stopped logging round count after 5,500. It's...

I looked into that when I re-barrel my tang safety 77,Ruger's website said they no longer did re-barreling on the tang safety models.I...

Bore size,powder capacity,powder type,high velocity and pressure,shooting too many rounds down a hot barrel without letting it cool down...