Willys

That Thor is a good example of a bulket that has too much engagement at 3.7” - should be at keast 3.850 to get out of donut area.

Its nice being able to number each shot - no more coloring bullets! The wifi transmitter works so well you can get by without the...

Barrels typically speed up over the first couple hundred rounds then begin slowing the last couple hundred until accuracy drops off...

Each caliber is different - some work well with universal seaters giving low runout and others prefer case to be held more concentric...

Why not? I seat my bullets all to +/- .0005 without adjusting the micrometer. The ones that are out of spec are fowlers . Your press...

i would rebarrel with a 30” chambered in 338 edge.

The factory 26” runs 300 gr @ 2850 - 2880 with RL33. Go 30” should bump to 2980 which is a good node. I like the 338 Terminator for...

I copied Broz’s solution for a packable 338 pushing 300 gr Bergers at 3000 fps and it works very well. 338 Terminator (Defensive Edge...

Have a Hart 27” Fluted Sendero on a .338 Terminator that shoots excellent - took a 5x7 bull 3 weeks ago at 700y.

Nice shooting! That 245 Berger is impressive! Rivals the infamous 300 gr .338 even. Congrats to shooter and his grandson - great team!

Mind boggling, I would think more space in case would lower pressure. I guess the more dense powder ignited faster to offset the extra...

The drawback to binos is 1) not as good as Pures for glass and ergonomics, 2) when shooting prone you can easily re-range with handheld...

Don’t start bumping until needed to chamber then bump a minimum amount needed to chamber with minimal resistance - typically .002.

Rokslide did a test from in the freezer overnight and Revic worked but Sig didn't. But Freezers are zero degrees - I would test in...

You carry it outside your jacket in below freezing weather?