Willys's latest activity

I copied Broz’s solution for a packable 338 pushing 300 gr Bergers at 3000 fps and it works very well. 338 Terminator (Defensive Edge...

Have a Hart 27” Fluted Sendero on a .338 Terminator that shoots excellent - took a 5x7 bull 3 weeks ago at 700y.

Nice shooting! That 245 Berger is impressive! Rivals the infamous 300 gr .338 even. Congrats to shooter and his grandson - great team!

Mind boggling, I would think more space in case would lower pressure. I guess the more dense powder ignited faster to offset the extra...

The drawback to binos is 1) not as good as Pures for glass and ergonomics, 2) when shooting prone you can easily re-range with handheld...

Don’t start bumping until needed to chamber then bump a minimum amount needed to chamber with minimal resistance - typically .002.

Rokslide did a test from in the freezer overnight and Revic worked but Sig didn't. But Freezers are zero degrees - I would test in...

You carry it outside your jacket in below freezing weather?

The Sig challenge is cold weather performance. Thats the reason I went Revic. Then fog and snow which is a challenge for all.

I do like that also - handy with dual readouts on turret. Still trying to figure out why Br4 and Revic aap won’t agree with BR4 off by...

Any updates on Sig2 vs Revic? Have had great luck with AB

You need a standard 9/16 x 28 brake. Pretty common as is the adapter to 5/8 24.

Try liquid - no dust less mess more consistant.

The 20x has ssme weight as NX8 4-32 and the 4.5-35 is half pound heavier so no big interest. Im sure the glass is a bit better.

Never use steel pins to clean, just burnish fired brass necks with stiff nylon brush on cordless. If virgin brass dip neck in liquid...